User Tools

Site Tools


code_label_design_info

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
code_label_design_info [2016/11/04 10:19 (8 years ago)] swindcode_label_design_info [2021/06/10 17:02 (3 years ago)] (current) swind
Line 1: Line 1:
 ====== Code Based Label Design Information ====== ====== Code Based Label Design Information ======
-[[http://wws5.com/|{{http://wws5.com/images/topxxxgif-ani.gif  |Windward Software}}]]+ 
 +<note important>This document is also available as a FreshDesk Solution Article \\ 
 +</note>
  
 ====== Before We Can Begin ====== ====== Before We Can Begin ======
Line 131: Line 133:
 **Stick tags (perennial tags). ** **Stick tags (perennial tags). **
  
-| {{:label_stock:labeldesign:img_0804.jpg?300|}} | For these tags the size of the tag and the printable area of these tags are very important. Also, the direction of the print will be a factor (readable from the left or the right). These tags commonly come in either a 4 inch by 1 inch or a 5 inch by 1 inch|+| {{:label_stock:labeldesign:img_0804.jpg?300|}} | For these tags the size of the tag and the printable area of these tags are very important. Also, the direction of the print will be a factor (readable from the left or the right). These tags commonly come in either a 4 inch by 1 inch or a 5 inch by 1 inch. Usually the bottom inch or two would not be printed on because it would be inserted into the soil in the pot.|
  
-| {{:label_stock:labeldesign:img_0805.jpg?300|}} | **Loop tags (Tree tags). ** For these tags the size of the tag and the printable area of these tags are very important, as is the position of the holes and the tear-off (does the hole exit the printer first or last). Also, the direction of the print will be a factor (readable from the left or the right). | {{:label_stock:labeldesign:multi_loop_first.jpg?170|}}{{:label_stock:labeldesign:multi_loop_last.jpg?190|}} |+| {{:label_stock:labeldesign:img_0805.jpg?300|}} | **Loop Tags (Tree Tags). ** For these tags the size of the tag and the printable area of these tags are very important, as is the position of the holes and the tear-off (does the hole exit the printer first or last). Also, the direction of the print will be a factor (readable from the left or the right). | {{:label_stock:labeldesign:multi_loop_first.jpg?170|}}{{:label_stock:labeldesign:multi_loop_last.jpg?190|}} | 
 + 
 +| {{:label_stock:labeldesign:img_0806b.jpg?300|}} |  **Loop Tags (Tree Tags). **  Same as above but the printer is capable of wider stock, so the part of the label that has the holes in it would exit out the side of the printer. Again the location of the holes and the tear off are very important. | {{:label_stock:labeldesign:1_out_loop_to_right.jpg?300|}} | 
 + 
 + 
 +| {{:label_stock:labeldesign:new_basket_loop.jpg?600|}} |  **Completed Loop Tags (Tree Tags) on yellow stock. ** | 
 + 
 + 
 +<code> 
 +Example of code for the above label.   
 + 
 +{D2349,1049,2349|} 
 +{C|} 
 +{D2349,1049,2349|} 
 +{AX;+000,+000,+00|} 
 +{AY;+00,0|} 
 +{PC000;0215,0600,05,05,Q,11,B|} 
 +{RC000;<DESCRIPTION,40>|} 
 +{XB00;0190,0056,9,3,03,1,0101,+0000000000,000,0,00|} 
 +{RB00;<BARCODE,-1>|} 
 +{XB01;0200,1058,9,3,03,1,0101,+0000000000,000,0,00|} 
 +{RB01;<BARCODE,-1>|} 
 +{PC001;0210,0100,05,05,Q,11,B|} 
 +{RC001;<PARTNO,-1>|} 
 +{PC002;0131,0600,05,05,Q,11,B|} 
 +{RC002;<PARTNO,-1>|} 
 +{PC003;0208,0398,05,05,Q,11,B|} 
 +{RC003;<LIST,-1>|} 
 +{PC004;0153,0758,10,10,Q,11,B|} 
 +{RC004;<LIST,-1>|} 
 +{PC005;0074,0600,05,05,Q,11,B|} 
 +{RC005;<N.FREEFORM:1,-1>|} 
 +{PC006;0056,0165,05,05,Q,11,B|} 
 +{RC006;<BARCODE,-1>|} 
 +{PC007;0066,1100,05,05,Q,11,B|} 
 +{RC007;<BARCODE,-1>|} 
 +<NEWLABEL> 
 +{PC008;0469,0600,05,05,Q,11,B|} 
 +{RC008;<DESCRIPTION,40>|} 
 +{XB02;0444,0056,9,3,03,1,0101,+0000000000,000,0,00|} 
 +{RB02;<BARCODE,-1>|} 
 +{XB03;0454,1058,9,3,03,1,0101,+0000000000,000,0,00|} 
 +{RB03;<BARCODE,-1>|} 
 +{PC009;0464,0100,05,05,Q,11,B|} 
 +{RC009;<PARTNO,-1>|} 
 +{PC010;0385,0600,05,05,Q,11,B|} 
 +{RC010;<PARTNO,-1>|} 
 +{PC011;0462,0398,05,05,Q,11,B|} 
 +{RC011;<LIST,-1>|} 
 +{PC012;0407,0758,10,10,Q,11,B|} 
 +{RC012;<LIST,-1>|} 
 +{PC013;0328,0600,05,05,Q,11,B|} 
 +{RC013;<N.FREEFORM:1,-1>|} 
 +{PC014;0310,0165,05,05,Q,11,B|} 
 +{RC014;<BARCODE,-1>|} 
 +{PC015;0320,1100,05,05,Q,11,B|} 
 +{RC015;<BARCODE,-1>|} 
 +<NEWLABEL> 
 +{PC016;0723,0600,05,05,Q,11,B|} 
 +{RC016;<DESCRIPTION,40>|} 
 +{XB04;0698,0056,9,3,03,1,0101,+0000000000,000,0,00|} 
 +{RB04;<BARCODE,-1>|} 
 +{XB05;0708,1058,9,3,03,1,0101,+0000000000,000,0,00|} 
 +{RB05;<BARCODE,-1>|} 
 +{PC017;0718,0100,05,05,Q,11,B|} 
 +{RC017;<PARTNO,-1>|} 
 +{PC018;0639,0600,05,05,Q,11,B|} 
 +{RC018;<PARTNO,-1>|} 
 +{PC019;0716,0398,05,05,Q,11,B|} 
 +{RC019;<LIST,-1>|} 
 +{PC020;0661,0758,10,10,Q,11,B|} 
 +{RC020;<LIST,-1>|} 
 +{PC021;0582,0600,05,05,Q,11,B|} 
 +{RC021;<N.FREEFORM:1,-1>|} 
 +{PC022;0564,0165,05,05,Q,11,B|} 
 +{RC022;<BARCODE,-1>|} 
 +{PC023;0574,1100,05,05,Q,11,B|} 
 +{RC023;<BARCODE,-1>|} 
 +<NEWLABEL> 
 +{PC024;0977,0600,05,05,Q,11,B|} 
 +{RC024;<DESCRIPTION,40>|} 
 +{XB06;0952,0056,9,3,03,1,0101,+0000000000,000,0,00|} 
 +{RB06;<BARCODE,-1>|} 
 +{XB07;0962,1058,9,3,03,1,0101,+0000000000,000,0,00|} 
 +{RB07;<BARCODE,-1>|} 
 +{PC025;0972,0100,05,05,Q,11,B|} 
 +{RC025;<PARTNO,-1>|} 
 +{PC026;0893,0600,05,05,Q,11,B|} 
 +{RC026;<PARTNO,-1>|} 
 +{PC027;0970,0398,05,05,Q,11,B|} 
 +{RC027;<LIST,-1>|} 
 +{PC028;0915,0758,10,10,Q,11,B|} 
 +{RC028;<LIST,-1>|} 
 +{PC029;0836,0600,05,05,Q,11,B|} 
 +{RC029;<N.FREEFORM:1,-1>|} 
 +{PC030;0818,0165,05,05,Q,11,B|} 
 +{RC030;<BARCODE,-1>|} 
 +{PC031;0828,1100,05,05,Q,11,B|} 
 +{RC031;<BARCODE,-1>|} 
 +{RM;-00-00|} 
 +{XS;I,0001,0002C6200|} 
 +</code>
  
-| {{:label_stock:labeldesign:img_0806b.jpg?300|}} |  **Loop tags (Tree tags). **  Same as above but the printer is capable of wider stock, so the part of the label that has the holes in it would exit out the side of the printer. Again the location of the holes and the tear off are very important. | {{:label_stock:labeldesign:1_out_loop_to_right.jpg?300|}} | 
  
  
Line 145: Line 247:
  
 | {{:label_stock:labeldesign:loop_color.jpg?250|}} | You can see by the examples on the left and right here, that the tan and light blue stock might work, but the red definitely will not work as a barcode label. | {{:label_stock:labeldesign:loop_BW.jpg?250|}} | | {{:label_stock:labeldesign:loop_color.jpg?250|}} | You can see by the examples on the left and right here, that the tan and light blue stock might work, but the red definitely will not work as a barcode label. | {{:label_stock:labeldesign:loop_BW.jpg?250|}} |
- 
- 
  
  
Line 206: Line 306:
 ==== System Five Text Fields ====  ==== System Five Text Fields ==== 
  
-http://mywindward.wws5.com/selfhelp/viewarticle.php?f=t&u=http://mywindward.wws5.com/selfhelp/helpfile/systemfive/index.html?conbarcodetextfields.htm+https://wiki.windwardsoftware.com/doku.php?id=barcode_and_text_fields 
  
  
Line 213: Line 314:
  
 ====== ======
-[[http://mywindward.wws5.com|{{  http://wws5.com/support/images/cust_support_banner_bottom.jpg  |myWindward}}]] 
  
 Created by Steve Wind February 23 2016 Created by Steve Wind February 23 2016
  
-Updated October 31 2016+Updated June 10 2021
code_label_design_info.1478279971.txt.gz · Last modified: 2016/11/04 10:19 (8 years ago) by swind