Windward Software Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Main dataset does not recognise the local dataset ======

**Error:**

For Standalone LAN

When attempting to update the Standalone dataset the following error is displayed:\\
The main dataset does not recognize this local dataset. You will not be able to synchronize the two.

**Solution:**

  - Note the standalone station ID number.
  - Run mad.exe to obtain the IP hash for the Standalone computer.  Keep a note of the value.
  - Start the Pervasive Control Centre on the server.
  - Open the STANDALONE.BTR table.  This may require an ODBC connection to the dataset.
  - Remove the data under the Machine column for the standalone corresponding to the Standalone station.
  - Add the hash information from #2 to the Machine column for the standalone corresponding to the Standalone station.
  - Close the Pervasive Control Centre and run the Standalone update.

\\
\\
\\
----
Author: arose\\
Editor: arose\\
Last Edited: 15-May-2008