User Tools

Site Tools


faq:isc250_errors

This is an old revision of the document!


Ingenico iSC 250 Errors

Datacap Configuration not found or incorrect.

  • The device does not have the datacap forms loaded, or the RBA, or the End-to-End Encryption loaded on the device. Please contact your pinpad vendor.
  • If the device boots up with “lane closed” then this confirms that the datacap forms were not loaded. The device should say “Welcome” when programmed properly.
faq/isc250_errors.1470181061.txt.gz · Last modified: 2016/08/02 16:37 (8 years ago) by craig