Differences

This shows you the differences between two versions of the page.

--- faq:isc250_errors [2021/06/07 10:38 (3 years ago)] – [Encryption should not be enabled] craig
+++ faq:isc250_errors [2024/04/09 09:28 (2 weeks ago)] (current) – [Invalid Secure Device] craig
@@ Line 13: / Line 13: @@
   * ie there will be an **Ingenico is250 Rapid Connect E2E** and a **Ingenico is250 Rapid Connect** (no E2E)
-===== Invalid Secure Sevice =====
+===== Invalid Secure Device =====
-  * Update dsiEMVX and dsiPDCX from [[http://www.datacapepay.com/downloadmenu/]]
+  * Update dsiEMVX and dsiPDCX from [[http://www.datacapepay.com/downloadmenu/|http://www.datacapepay.com/downloadmenu/]]
+  * If they are using the Remote POS device manager, this needs to be updated on the client workstation.
+===== SecureDevice not Valid on Test Servers =====
+  * If you are using the dsiPDCX screen prompt, the test servers operation is not valid with this device. You can temporarily switch the pinpad to a Vx805 to do the test as the operation does not actually check for the pinpad.
+  * If you are using a pinpad, please update the datacap controls as above.