User Tools

Site Tools


faq:programming_a_symbol_stb4278_barcode_scanner

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
faq:programming_a_symbol_stb4278_barcode_scanner [2021/05/25 16:04 (3 years ago)] swindfaq:programming_a_symbol_stb4278_barcode_scanner [2021/05/27 13:57 (3 years ago)] (current) swind
Line 1: Line 1:
-====== Symbol STB4278 ======+====== Symbol STB4278 Cradle with LS4278 Scanner ======
 \\ \\
 +<note important>This document is also available as a FreshDesk Solution Article \\
 +</note>
  
  
-This Barcode Scanner model is a subset of the LS4278.\\ 
 We have tested it with the programming sheets for the LS2208 and the following instructions will work to program it. We have tested it with the programming sheets for the LS2208 and the following instructions will work to program it.
  
  
-**To program the scanner to accept both prefix and suffix**+**To program the scanner to accept both an STX prefix and Carriage Return suffix**
   1)  Scan the Scan options Barcode   1)  Scan the Scan options Barcode
 {{faq:ls2208-1.jpg|}} {{faq:ls2208-1.jpg|}}
Line 57: Line 58:
 You should see something like this: You should see something like this:
  
-{{dos1.jpg|}}+{{:dos1.jpg|}}
  
 What you are looking for is that the scanner scanned a ^B before the barcode and it translates to a little smiley face character on the next line. What you are looking for is that the scanner scanned a ^B before the barcode and it translates to a little smiley face character on the next line.
faq/programming_a_symbol_stb4278_barcode_scanner.1621983842.txt.gz · Last modified: 2021/05/25 16:04 (3 years ago) by swind