Windward Software Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
Parent article: [[:faq:pvsw-errors]]
====== Fixing a Pervasive Status 94 ======

====== Fixing a Pervasive Status 171 ======



===== What is it? =====

The Application encountered a Permission Error.


//The designated server is in the server routing table, but your particular client is not logged into that server//

One cause of this is the server IP has changed, causing a status 94 when a client trys to connect to the database on the server. The Pervasive SAT (Server Address Table) entries need to be removed and re-created. Running WWTWEAK.EXE will clear the SAT entries and once you attempt to re-connect to the database, they are re-written.

WWTWEAK can be downloaded from the public FTP site [[ftp://ftp.windward-ca.com/pub/special/WWTweak.exe]] or uploaded internally from our \support_team\tools folder

//



**Steps to run wwTweak utility**//

**Step 1)** Download wwTweak from the ftp site and save it to desktop

**Step 2)** Double click on wwTweak.exe 

**Step 3)** Select proper Pervasive Version and click on Remove SAT entries **(//Screen Shot 1//)**

**Step 4)** You will be prompted with pop-up select yes and you should see a screen similar to **(//Screen Shot 2//)**

**Step 5)** Load up Pervasive Server and error should be cleared

**(Screen Shot 1)** 

{{windward_teak_utility.jpg|}}

**(Screen Shot 2)**

{{image3.jpg|}}