User Tools

Site Tools


Get the Most Out of Your ERP

Windward System Five Add-Ons

System Five Add-Ons & Integrations help simplify the way you do things.

The Windward Professional Services Catalog

Our catalog of services has topic-based, role-based, or technical plans that can help you maximize your software investment.

Follow Windward Software

New Feature Round-up

Honeywell 3800G, 1452G and HP ElitePOS 2D Barcode Scanners



Print the PDF file above and scan the barcode

This is a single barcode scan to enable the Ctrl+B prefix otherwise known as the STX prefix.

It has been tested to work with the 3800G as well as the 1452G

This also works with the HP ElitePOS 2D Barcode Scanner.

Be aware that with Windows 10 you need to make an additional change to the Command Prompt to allow Ctrl characters to work. If you don't do this step in Windows 10 you won't see the Ctrl+B ( ^B ) character.

Open a search box and type CMD. This should find the CMD.EXE. Right click on it and select run as administrator. Right click the icon at the top left of the command prompt window and select Properties. Make sure that “Use legacy console (requires relaunch) is checked. Click OK and close the command prompt.

Now go to System5 / Setup Wizard / Point of Sale Devices / Barcode Reader

  1. Click on “Now Scan Barcode” button
  2. Scan any Item with a barcode
  3. Click “Save Settings” button
  4. Click “CLOSE” button on top to exit

Created by Steve Wind February 19 2016

Honeywell Voyager 1452g Alternate Configuration

1. Scan the #5 barcode (~ P R E B K 2 9 9 0 5 4 2 0 6) to program the STX on the scanner's prefix: voyager_1200_series_stx_prefix_etx_suffix.pdf

honeywell_3800g.txt · Last modified: 2021/04/19 20:55 (15 months ago) by kturner