User Tools

Site Tools


installing_mercury_netepay_for_us-emv

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
installing_mercury_netepay_for_us-emv [2020/06/02 09:56 (17 months ago)]
kevin
installing_mercury_netepay_for_us-emv [2021/08/30 16:52 (8 weeks ago)] (current)
plagrada
Line 1: Line 1:
 ====== Installing Datacap Netepay for US EMV ====== ====== Installing Datacap Netepay for US EMV ======
  
- +https://newaccount1608055419986.freshdesk.com/a/solutions/articles/66000495032
-==== Install Netepay 5 for Worldpay Payments ==== +
- +
-**NEW** [[employees:Netepay5Director|Netepay 5 Director]] +
- +
-Netepay 5 Server should be installed in the same manner as other netepay 5 server installs.  Alternatively you can install on every workstation and set the netepay EMV server to localhost.\\ +
-  * [[http://www.datacapepay.com/epay50/2946/|netepay5 Worldpay Integrated Payments]] +
-  * [[http://www.datacapepay.com/downloadmenu/|Other Processors, Select Netepay 5]] +
- +
-<note warning>Netepay should never be installed on an internet accessible server. Do not install on terminal server session.</note> +
- +
-==== Workstation Install ==== +
- +
-=== Install USB-serial drivers === +
- +
-Install one of the following USB-Serial drivers from: +
-  * http://www.datacapepay.com/downloadmenu +
-  * Device Drivers +
-== Vx805 == +
-  * [[http://www.datacapepay.com/downloadmenu/)|805 USB Driver.zip]]\\ +
-  * [[ftp://ftp.windward-ca.com/pub/mercurypay/Configuring the VeriFone VX805 for USB Cabling.pdf|Configuring the VeriFone VX805 for USB Cabling.pdf]] This may not be needed, but could be the issue if you receive\\ ''No Response from Pinpad''\\ +
- +
-== iSC250 USB-serial drivers == +
-  * [[http://www.datacapepay.com/downloadmenu/|Verifone VX series (VX805/VX820/VX810)]] +
- +
-== Equinox L5300 USB-serial drivers == +
-  * [[http://www.datacapepay.com/downloadmenu/|Equinox (L5300/L5200)]] +
- +
-=== Install datacap software === +
-  * [[http://www.datacapepay.com/epay50/3728/]] +
- +
-In the Setup Wizard, Payment Processing, Processor Tab, select Mercury US (EMV/Local). Set the EMV server IP address.\\ +
-PINPad Tab, select dsiEMVX and vx805 for Mercury.\\ +
-In the credit card tab, select Tokenization. +
- +
-=== Errors === +
- +
-“vx805 Invalid Field - Encrypted Format” +
- +
-This means you have the wrong pinpad selected.  You have a mercury pinpad selected on a non mercury customer. +
- +
- +
installing_mercury_netepay_for_us-emv.txt · Last modified: 2021/08/30 16:52 (8 weeks ago) by plagrada