Differences

This shows you the differences between two versions of the page.

--- installing_mercury_netepay_for_us-emv [2015/09/11 09:41 (9 years ago)] – [Workstation Install] craig
+++ installing_mercury_netepay_for_us-emv [2021/08/30 16:52 (3 years ago)] (current) – plagrada
@@ Line 1: / Line 1: @@
 ====== Installing Datacap Netepay for US EMV ======
+https://newaccount1608055419986.freshdesk.com/a/solutions/articles/66000495032
-==== Install Netepay 5 for Mercury Payments ====
-Netepay 5 Server should be installed in the same manner as other netepay 5 server installs.  Alternatively you can install on every workstation and set the netepay EMV server to localhost.\\
-  * [[http://www.datacapepay.com/netepay5-mercuryoos.htm|netepay5 mercury]]
-==== Workstation Install ====
-=== Install vx805 USB-serial drivers ===
-The vx805 comes with a USB cable that emulates a serial port. No power block is required.\\
-If you are installing on Terminal Services, you need to install the USB drivers on the Workstation and use Serial Port redirection. (note that serial port redirection does not work when running System Five in Administrator Mode)
-  * [[ftp://ftp.windward-ca.com/pub/mercurypay/805 USB Driver.zip|805 USB Driver.zip]]\\
-  * [[ftp://ftp.windward-ca.com/pub/mercurypay/Configuring the VeriFone VX805 for USB Cabling.pdf|Configuring the VeriFone VX805 for USB Cabling.pdf]]\\
-=== Install datacap software ===
-  * [[http://www.datacapepay.com/dsiemvus.htm|dsiemvus.ocx]]
-  * [[http://www.datacapepay.com/dsipdcx.htm|dsipdcx.ocx]]
-  * [[http://www.datacapepay.com/dsiclient.htm|dsiclient.ocx]]
-In the Setupwizard, Payment Processing, Processor Tab, select Mercury US (EMV/Local). Set the EMV server IP address.\\
-PINPad Tab, select dsiEMVX and vx805 for Mercury.\\
-In the credit card tab, select Tokenization.