User Tools

Site Tools


locate_pervasive_server

This is an old revision of the document!


Locating and starting the Pervasive Server

For Windward System Five installations greater than 3 servers, it is recommended to use a Client-Server model. The Pervasive software is loaded to the server and the Pervasive Engine (controlling read and write access to the database) runs as a service.

To determine if the Pervasive server is running, use the windows Run Command or right click on My Computer and select Manage then select services and applications. Figure 1 shows how to run the command to bring up the services window.


Figure 1 - Run services.msc command

locate_pervasive_server.1279042364.txt.gz · Last modified: 2010/07/13 10:32 (14 years ago) by andrew