User Tools

Site Tools


moneris_pinpads

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
moneris_pinpads [2018/01/17 13:36 (6 years ago)] – [Moneris POSPad EMV (Chip/PIN/Contactless)] craigmoneris_pinpads [2021/10/19 09:29 (2 years ago)] (current) – [Supported Moneris™ PINPads] craig
Line 1: Line 1:
 ====== Supported Moneris™ PINPads  ====== ====== Supported Moneris™ PINPads  ======
  
-Datacap netepay version 5.07.20 is required and must be purchased through Windward Software Inc.\\ +Datacap netepay version 5.07.21 is required and must be purchased through Windward Software Inc.\\ 
-Requires DSIEMVClientX® 1.30\\+Requires DSIEMVClientX® 1.32\\
  
 ===== Moneris POSPad EMV (Chip/PIN/Contactless) ===== ===== Moneris POSPad EMV (Chip/PIN/Contactless) =====
-^ +==== Verifone P400 ==== 
-{{:windward_supported_hardware_list:ingenico-ipp320.jpg?direct&200 |}}\\ + 
-**Coming Soon**^ +{{:hardware:p400moneris.jpg?200|}} 
-Ingenico iPP320 POS Pad. This device will be available in early 2018. +<note important>Available NOW Verifone P400 for Moneris POSPAD in Windward System Five version 6.2.4.68 or higher.</note> 
-Tokenization +  * Requires [[http://www.datacapepay.com/epay50/3893/|NETePay Moneris Canadian Host EMV POSPAD - MSH 5.07.21]] or an updated 5.07.20 using dsiEMVClientX 1.32  
-  * Contactless+  * Contactless / NFC 
 +  * **Connection to the POS workstation is via TCP/IP** which will require your network administrator to reserve an internal static IP and allow outside internet communication. There is no serial or USB cable required. 
 +  * Batch is autoclose 
 +  * Available [[store_and_forward_off-line_processing|Store and Forward Off-Line Processing]] 
 +  * Moneris Configuration code is **C000500EMV** 
 +  * {{ :hardware:moneris_verifone_p400_configuration.pdf |P400 Configuration}} 
 +  * P400s and iPP320s can be mixed 
 +  * Note on debit cash back and debit flash. If you enable the cash back feature it will prompt a customer for the cash back amount but this will also disable debit flash. If you want to use the flash, simply tender as a credit card and debit flash will work but will not prompt for cash back. 
 +  * [[Moneris P400 Trouble Shooting]] 
 +<note tip>The Moneris P400 does support some tokenization.\\ 
 +  * Collect card, Preauth is not supported 
 +  * **Contactless tokens only work for refunds (not voids).** 
 +So to take a token for future sales you will need to take a deposit on the invoice and instruct the customer to **NOT USE TAP**, they must insert.  Attempting to use a contactless token for anything else other than a refund will generate an **Invalid Mode of Entry**. Error. 
 +</note> 
 +---- 
 +==== Ingenico iPP320 POSPAD ==== 
 + 
 +{{:windward_supported_hardware_list:ingenico-ipp320.jpg?direct&200}}\\ 
 +**Now available** in System Five version 6.2.2.147 or higher.  
 +Ingenico iPP320 POS Pad\\ 
 +  * Contactless / NFC
   * Serial or USB   * Serial or USB
-  * Requires a separate TCP/IP connection as well as a Serial or USB connection to the POS computer. +  * {{ :hardware:moneriscables.pdf |Requires a separate TCP/IP connection as well as a Serial or USB connection to the POS computer.}}  This may require additional expense of installation of network cables and network switches
-  * Batch must be closed on each pinpad. +  * Batch is autoclose 
-  * Significant delay of about 10 seconds for the device to accept payment^+  * Available [[store_and_forward_off-line_processing|Store and Forward Off-Line Processing]] 
 +  * Requires new or upgrade of datacap NETePay Moneris Canadian Host EMV POSPAD - MSH 5.07.20 
 +  *  Note on debit cash back and debit flash. If you enable the cash back feature it will prompt a customer for the cash back amount but this will also disable debit flash. If you want to use the flash, simply tender as a credit card and debit flash will work but will not prompt for cash back. 
 +  * Does not support tokenization. 
 [[https://www.datacapsystems.com/blog/2017/11/20/datacap-releases-moneris-pospad-payments-interface-in-canada|Datacap Newrelease]]\\ [[https://www.datacapsystems.com/blog/2017/11/20/datacap-releases-moneris-pospad-payments-interface-in-canada|Datacap Newrelease]]\\
 [[employees:Moneris ipp320 Configuration|Moneris ipp320 Configuration]] [[employees:Moneris ipp320 Configuration|Moneris ipp320 Configuration]]
 +
 +
 +----
  
 ===== Moneris VX810 EMV (Chip and PIN) ===== ===== Moneris VX810 EMV (Chip and PIN) =====
Line 30: Line 57:
 Any client running Netepay 5.03 must upgrade to Netepay 5.05.05 before May 2015\\ Any client running Netepay 5.03 must upgrade to Netepay 5.05.05 before May 2015\\
  
 +
 +----
  
  
moneris_pinpads.1516224977.txt.gz · Last modified: 2018/01/17 13:36 (6 years ago) by craig