Datacap netepay version 5.07.20 is required and must be purchased through Windward Software Inc.
Requires DSIEMVClientX® 1.30

• Requires NETePay Moneris Canadian Host EMV POSPAD - MSH 5.07.21
• Contactless / NFC
• Connection to the POS workstation is via TCP/IP which will require your network administrator to reserve an internal static IP. There is no serial or USB cable required.
• Requires a separate TCP/IP connection as well as a Serial or USB connection to the POS computer. This may require additional expense of installation of network cables and network switches.
• Batch is autoclose
• Available Store and Forward Off-Line Processing
• Moneris Configuration code is C000500EMV
• P400 Configuration
• P400s and iPP320s can be mixed
• Note on debit cash back. If you enable the cash back feature it will prompt a customer for the cash back amount but this will also disable debit flash. If you want to use the flash, simply tender as a credit card and debit flash will work but will not prompt for cash back.

Now available in System Five version 6.2.2.147 or higher. Ingenico iPP320 POS Pad

• Contactless / NFC
• Serial or USB
• Requires a separate TCP/IP connection as well as a Serial or USB connection to the POS computer. This may require additional expense of installation of network cables and network switches.
• Batch is autoclose
• Available Store and Forward Off-Line Processing
• Requires new or upgrade of datacap NETePay Moneris Canadian Host EMV POSPAD - MSH 5.07.20
• Note on debit cash back and debit flash. If you enable the cash back feature it will prompt a customer for the cash back amount but this will also disable debit flash. If you want to use the flash, simply tender as a credit card and debit flash will work but will not prompt for cash back.

Datacap Newrelease
Moneris ipp320 Configuration

Moneris EMV is available in System Five Version 6.0.50.0 and above.
The supported pinpad is the Verifone VX810
This solution is not suitable for mail order, ecommerce, as cards are not stored on file.
Moneris Gift cards are not supported.
Auto batch close is now supported.
RS-232 Serial connection only (USB-Serial connectors do not work)
Any client running Netepay 5.03 must upgrade to Netepay 5.05.05 before May 2015

• Supported USA PINPads
• Supported Canadian Mercury PINPads
• Supported Canadian Moneris PINPads
• Supported Canadian Paymentech PINPads
• Supported Global Payment Terminals