Windward Software Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

{{:cs4070.jpg?500}}
====== Motorola CS4070 Wireless Scanner ======

[[https://www.windwardsoftware.com/resources/shop-pos-hardware.html|SHOP FOR COMPATIBLE HARDWARE]]

<note important>This configuration article assumes that the device driver is already installed and that the device is properly communicating or able to scan in Windows. Refer to Zebra page for more details https://portal.motorolasolutions.com/Support/US-EN/Mobile+Networks+RFID+and+BarCode+Scanners/Bar+Code+Scanning/General+Purpose+Scanners/CS4070_US-EN</note>

[[http://wiki.wws5.com/doku.php?id=faq:programming_a_symbol_ls_2208_barcode_scanner|Follow the configuration sheet for Symbol LS2208 Scanner]]

  - Open CMD
  - Scan a sample barcode. The results should look something like the one below.

{{:employee:cmdprefix.jpg?600|}}

Otherwise, scan DEFAULT to set it back to it's default configuration. Then go through the configuration steps again.

===== Now save the settings in System5. =====

  - Setup Tools
  - Setup Wizard
  - Point of Sale Devices
  - Barcode Reader

  * On the right side, click on “Read Barcode Scanner” button and scan an item
  * Click the “Save” button once done.