Differences

This shows you the differences between two versions of the page.

--- netepay_setup_-_datacap_install [2020/06/09 16:40 (4 years ago)] – [Introduction to NETePay] jege
+++ netepay_setup_-_datacap_install [2023/05/24 10:58 (11 months ago)] (current) – craig
@@ Line 1: / Line 1: @@
 ====== How to install Datacap NETePay ======
+Please see: https://support.windwardsoftware.com/a/solutions/articles/66000491307
+See [[installing_datacap_netepay|Installing Datacap NETePay]]
-===== Introduction to NETePay =====
-Windward System Five uses a middleware application called Datacap NETePay to send/receive transactions to and from the payment processor.
-NETePay is created by Datacap Systems Inc and is a third-party software solution used for credit/debit/gift card processing. Windward System Five communicates with NETePay and NETePay communicates with the pinpad's and processor networks.
-  * For **Canadian Mercury EMV with the VX810 Pinpads** please follow [[employee:installing_mercury_emv|these]] instructions.\\
-  * For **Mercury US EMV with vx805 pinpads**, please see [[installing_mercury_netepay_for_us-emv|installing mercury NETePayfor US EMV]] \\
-==== The steps below works the same for HOSTS or TERMINAL base Netepay ====
-Download the following programs and install them in the order listed. **Always restart** when installers instruct you to do so.
-  - Go to http://www.datacapepay.com/ to and click on "Get Started" this will take you to the Download Page.
-  - Click on NETePay 5.0
-  - Select your exact Payment Processor as stated on our Merchant Sheet document. A better way of identifying the correct one is to select base on the 3 letter abbreviation of processor, which is always included on the merchant sheet.
-  - The most recent release version of NETepay is always selected by default. Check the version on the merchant sheet document and make sure to select that version from the drop-down menu on top of the page.
-  - Follow the steps until finished.
-===== Firewall Settings =====
-The NetEPay service will require the Windows firewall to be configured to allow access.  Follow these NetEPay instructions to configure your
-[[https://datacapsystems.com/support-articles/2018-2-27-director-firewall-settings|Windows firewall]].  If you have a different firewall solution, you will need to configure it to allow tcp ports 9000 and 9100.
-===== System Five Settings =====
-Review the [[payment_processing_-_settings|payment processing settings in System Five]].
-===== Trouble Shooting =====
-Visit this [[netepay_setup_-_datacap_troubleshoot|troubleshooting]] wiki if having communication issues with Datacap/NetePay.