User Tools

Site Tools


payment_processing_application_us

Payment Processing United States

What do you need, considerations

  • Chip and PIN, Chip and Signature
  • Reoccurring transactions
  • Multi-location gift card processing or single store gift cards
  • Multiple merchant id's
  • High security tokenization and end-to-end encryption.
  • Pre-authorizations.
  • Back office transactions
Windward Software recommends EVO and Worldpay from FIS as the most complete solution to your payment processing needs
  • First it has the utmost security with tokenization and end-to-end encryption. Card data is encrypted from the card swipe/insert/tap all the way to the processor and the card data is never stored on your system, even for reoccurring payments.
  • Full support for EMV credit, pin and emv debit, multi-location gift cards and EBT.
  • Wide range of supported EMV, E2E encrypted pinpads.

Find out more or sign up
http://info.worldpay.com/windward.html
https://go.evopayments.us/windwardsoftware


Worldpay Integrated Payments [MPH] (formerly Mercury Payments)

  • No Charge for datacap netepay
  • Supports Tokenization, End to End Encryption for High Security
  • EMV (Chip and Pin/Signature)
  • Easily supports multiple locations or multiple merchant id's.
  • Free Gift Card Processing Supports multi-location
  • Available Pinpads
    • Verifone P400 (available for rent or purchase through Worldpay IP)
    • Ingenico Lane 3000 and Lane 7000 (signature capture) Version 6.2.4.193
    • Verifone Vx805 (available for rent or purchase through Worldpay IP)
    • Ingenico iSC 250 Signature capture pinpad. End of Life
    • Equinox L5300 Signature capture pinpad.End Of Life End of Support (EOS): July 31, 2021
Please refer to the Supported Hardware list above for accuracy as changes may have occurred https://wiki.wws5.com/doku.php?id=supported_peripheral_hardware_list

EVO / Formerly Sterling Payment Systems [PRH/CP] [VRH/TS]

  • No Charge for datacap netepay
  • EMV (Chip and Pin/Signature)
  • Gift Card Processing
  • Available Pinpads
    • Verifone Vx805 (available through Sterling Payments)
    • Lane 3000
    • Lane 7000 (Signature capture)
    • Link 2500
  • Chase or TSYS networks.

Supported Processors (EMV)

Supported means they can work with System Five and Datacap, but expect a high level of work and frustration in getting all hardware ordered, configured and setup. If you don't have time or the patience, please use one of our recommended processors who can provide the devices pre-configured.

Chase Paymentech HOST [PNH]

  • datacap netepay purchase required.
  • EMV (Chip and Pin/Signature)
  • Available Pinpads
    • Verifone Vx805 (will not support contactless anymore)
    • Ingenico iSC 250 Signature Capture Pinpad (end of life)
    • Ingenico Lane 3000 and Lane 7000 (signature capture) Version 6.2.4.193

Elavon US [ELH]

  • datacap netepay purchase required.
  • EMV (Chip and Pin/Signature)
  • Available Pinpads
    • Verifone Vx805 (will not support contactless anymore)

Fiserv / First Data Rapid Connect [RCH] (FDMS)

  • datacap netepay purchase required.
  • EMV (Chip and Pin/Signature)
  • Available Pinpads
    • Verifone Vx805
    • Ingenico iSC 250 Signature Capture Pinpad
    • Lane 3000
    • Lane 7000 (Signature capture)
    • Link 2500

Global Payments [NDH]

  • datacap netepay purchase required.
  • EMV (Chip and Pin/Signature)
  • Available Pinpads
    • Verifone Vx805 (will not support contactless anymore)
    • Ingenico iSC 250 Signature Capture Pinpad
    • Ingenico Lane 3000 and Lane 7000 (signature capture) Version 6.2.4.193

Heartland [HPH]

  • datacap netepay purchase required.
  • EMV (Chip and Pin/Signature)
  • Available Pinpads
    • Ingenico iSC 250 Signature Capture Pinpad
    • Ingenico Lane 3000 and Lane 7000 (signature capture) Version 6.2.4.193

TSYS Summit Host [VSH]

  • datacap netepay purchase required.
  • EMV (Chip and Pin/Signature)
  • Available Pinpads
    • Verifone Vx805 (will not support contactless anymore)
    • Ingenico iSC 250 Signature Capture Pinpad
    • Lane 3000
    • Lane 7000 (Signature capture)
    • Link 2500

Omega Processing Inc using TSYS [VRH]

  • datacap netepay purchase NOT required.
  • EMV (Chip and Pin/Signature)
  • Available Pinpads
    • Verifone Vx805
    • Ingenico iSC 250 Signature Capture Pinpad
  • * Card not present? Yes, can use s5 on screen entry which can store the card. They can also use the datacap screen prompt too (but will not store the card)

Worldpay Core 610 [FRH] (Vantiv/Fifth-Third)

  • datacap netepay purchase required.
  • EMV (Chip and Pin/Signature)
  • Available Pinpads
    • Verifone Vx805 (will not support contactless anymore)
    • Ingenico Lane 3000 and Lane 7000 (signature capture) Version 6.2.4.193

Worldpay [WPH]

  • datacap netepay purchase required.
  • EMV (Chip and Pin/Signature)
  • Available Pinpads
    • Verifone Vx805
    • Lane 3000
    • Lane 7000 (Signature capture)
    • Link 2500
1. Requires multiple Netepay Servers


These are the pinpads that Windward has tested and recommends for most applications. Other pinpads are supported by datacap netepay however Windward has not tested them as they may be for particular applications.
Please refer to the Supported Hardware list above for accuracy as changes may have occurred https://wiki.wws5.com/doku.php?id=supported_peripheral_hardware_list
The world of FIS WorldPay
There are 4 different Worldpay networks, 3 of which are supported by datacap
  • Worldpay Core 610 / Vantiv / Fifth-third (The original Vantiv) [FTH]
  • Worldpay IP / Vantiv Integrated Payments / Mercury [MPH]
  • Worldpay / RBSLink (the original Worldpay) [WPH, WPT, LNK]
  • There is also Worldpay / Vantiv / Element which is not supported.
payment_processing_application_us.txt · Last modified: 2023/05/24 10:47 (10 months ago) by craig