Windward Software Wiki

User Tools

Site Tools

Trace:
pervasive_system_analyzer_network

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
pervasive_system_analyzer_network [2010/07/15 09:59 (14 years ago)] – andrewpervasive_system_analyzer_network [2021/02/27 11:07 (3 years ago)] (current) – tanya
Line 1: Line 1:
 ====== Pervasive System Analyzer Network Test ====== ====== Pervasive System Analyzer Network Test ======
  
-The objective of The Pervasive Network Test is to ensure we get 75/75 test messages across TCP/IP.  TCP/IP is a common computer network protocol used for Internet and Local Area Networks. +See [[https://support.windwardsoftware.com/a/solutions/articles/66000475755]]
- +
-The Pervasive System Analyzer can be found under the Programs in the Start Menu and Utilities under the Pervasive folder. +
-Figure 1 shows an example path to the Pervasive System Analyzer.   +
- +
-{{info_qa:databases:pervasive_system_analyzer.jpg|}}\\ +
-**Figure 1 - Starting the Pervasive System Analyzer from Windows Explorer** +
- +
-After starting the Pervasive System Analyzer, click next to bring up the options screen.  Ensure that the Test network communication option is selected.  Remove the selection from the other options. When ready click next.  Figure 2 showed the options to have selected for the Network Test. +
- +
-{{info_qa:databases:analyzer_options.jpg|}}\\ +
-**Figure 2 - Running the network test in Pervasive System Analyzer**  +
- +
-The target machine shown in Figure 3 is the name of the server where Pervasive has been installed.  Enter the name of your server in the target machine box then click next. +
- +
-{{info_qa:databases:analyzer_options2.jpg|}}\\ +
-**Figure 3 - Entering the server name for the network test ** +
- +
-The test messages transmission will be displayed as shown in Figure 4.  The test will stop after 75 test messages have been sent.  This test should take a few seconds or less.   +
- +
-{{info_qa:databases:analyzer_stresstest1.jpg|}}\\ +
-**Figure 4 - Network test transmitting the test messages**  +
- +
-After the test has completed then the results will be displayed as seen in Figure 5.  A successful test will show 75 of 75 test messages sent via TCP/IP.  +
- +
-{{info_qa:databases:analyzer_stresstest2.jpg|}}\\ +
-**Figure 5 - Network test results**  +
- +
----- +
-Author: arose\\ +
-Date: 15-Jul-2010\\ +
-Version: Pervasive 10 +
pervasive_system_analyzer_network.1279213141.txt.gz · Last modified: 2010/07/15 09:59 (14 years ago) by andrew