User Tools

Site Tools


pinpads

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
pinpads [2019/05/24 10:55 (2 years ago)]
craig [Ingenico iSC 250]
pinpads [2021/08/30 16:54 (8 weeks ago)] (current)
plagrada
Line 1: Line 1:
 ====== Certified USA EMV PINPads ====== ====== Certified USA EMV PINPads ======
  
-Important - each pinpad must be EMV certified with each processor. Just because a pinpad has a chip reader, does not mean that it is EMV certified with any or your processor. +https://newaccount1608055419986.freshdesk.com/a/solutions/articles/66000495033
- +
-===== Worldpay IP (Mercury) ===== +
-==== VeriFone VX805 with End-to-End Encryption. ==== +
-  * **This device is now EMV certified with Mercury and System Five.**   +
-  * This device may be purchased or rented from Mercury Payments or must be purchased though IBC +
-  * CHIP / MSR / [[contactless_payments|Contactless]] /PIN +
-  * No signature capture +
-  * USB 3 meter cables.  Serial or 1 USB meter cables are also available. +
-  * XPI Application (Load Version 8.42B) +
-{{::vx805.jpg?200|}}\\ +
- +
-[[Installing Mercury Netepay for US-EMV|Installing Mercury Netepay for US-EMV]] +
- +
-=== VeriFone Vx805 for processors other than Worldpay IP (Mercury) === +
-Most processors now support the Vx805 This is what you need to purchase. +
-  * Verifone VX805 USB (M280-703-A3-WWA-3)  +
-  * 3.0M USB Cable Vx805 USB A M (CBL282-038-02-A).  Serial or 1M USB cables are also available. +
-  * XPI Application (Load Version 8.42B) +
-  * Processor Encryption (processor-specific) +
-  * This device is not End-To-End Encrypted. +
-  * May be purchased from POS Portal, JRS POS Depot or POSData or IBC.  Please see [[http://www.datacapsystems.com/verifonevx805]] for specific ordering information, distributor links and supported processors. +
- +
- +
- +
-==== Ingenico iSC 250 ==== +
-{{::isc250.jpg?200|}} +
- +
-  * Chip / MSR / [[contactless_payments|Contactless]] / Signature +
-  * USB  [[http://www.datacapepay.com/downloadmenu/|Device Driver]] +
-  * [[http://www.datacapepay.com/downloadmenu/|dsiEMVx version 1.06]] or higher is required. +
-  * System Five version version 6.1.2.155 or higher is required.  +
-  * Chip Card returns and voids must be swiped. +
-  * The prompt **Debit with Pin? Yes/No ** is a bit confusing.\\ +
-    * **Yes** means this is a debit card that requires a PIN,  +
-    * **No** means this is a credit card. +
-  * The Enter key does not work in response to prompts even though the screen button Yes looks like the enter key. +
-  * **[[http://www.datacapsystems.com/ingenico-isc250|Information on ordering this device]]** +
-  * Supports RS232 Serial, USB/Serial (or TCP/IP for some end-to-end encrypted processors) +
- +
-===== Equinox L5300 ===== +
-{{hypercom_l5300.jpg|}} +
-<note important>This is only available for Worldpay IP (Mercury) and Chase Paymentech. You must have your supplier install/load the __datacap forms__ and the __debit encryption keys__ before they ship it to you.</note> +
- +
-  * PCI out of scope, therefore does not support card on file except with Mercury Tokenization. +
-  * Signature Capture +
-  * Magnetic Stripe Reader +
-  * PIN Entry - Device must have Debit Keys injected for your processor +
-  * EMV (Chip) +
-  * Optional NFC (MasterCard Paypass, Visa payWave, ApplePay) depending on your processor's ability to process NFC transactions. +
-  * USB or RS232 Serial +
-  * [[https://www.datacapsystems.com/equinox-l5300|Information on this device]] +
-  * :-( Does not work with Terminal Services Serial Port redirection, but can be used with the Remote POS device manager available in System Five version 6.1 +
- +
-    +
- +
- +
-====== Supported USA PINPads (NON-EMV) ====== +
- +
-**There be dragoons here** - Please read carefully.\\ +
-  * Ensure your PINPad is encrypted for your payment processor. +
-  * Please read the fine print. Not all pinpads will work for all situations. Items to consider:Terminal Services;Serial, USB or TCP/IP;Signature Capture; Card on File. +
-  * Some driver installs may be challenging. Please ensure you have at least 2 weeks lead time before going live. +
-  * US EMV is not supported. Even though your pinpad may have chip card reader, chances that it will support EMV when available are slim. +
-  * Some PINpads require loading of datacap forms or OPOS drivers by the Supplier or other third party. +
-  * If the PINpad you are considering is not on this list, it probably won't work.  Replacement models for obsolete PINpads probably won't work either. +
-  * Beware of purchasing second hand equipment from non-POS vendors. +
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
-===== Important Information on Device Location ===== +
- +
-The pinpad device may be mounted on a flat surface, wall, or customer stand (recommended). We recommend physically securing the device to avoid theft. Power may be provided from a host Point of Sale system or from an Ingenico power supply. The device must be placed close to an easily-accessible power outlet. +
-Do not place the pinpad on a PC monitor, adjacent to an electronically active security tag deactivation system, or near other sources of magnetic fields.\\ +
-|**The Pinpad device must be at least 12 inches away from an electronically active type of security tag**| +
- +
- +
- +
- +
- +
- +
- +
-===== Purchase information  ===== +
-Products Mercury Payment Systems can provide in the USA: +
-  * Stand Alone Credit Card Terminals. +
-  * Dial Backup Bridge. +
- +
- +
-You can purchase PINpads for the United States of America from the following sources. +
- +
-<code> +
-JR's POS Depot +
-Contact:  Luisa Rodas +
-TEL (954) 741-3433, x130 +
-TOL (877) 999-7374 +
-FAX (253) 238-2414 +
-http://jrposdepot.com +
-[email protected] +
-</code> +
- +
-<code> +
-POS DATA +
-Contact:  Becky O'Brien, Regional Business Development Manager +
-TEL   310-883-8340 +
-eMail [email protected] +
-web   http://www.posdata.com +
-</code> +
- +
-<code> +
-If you are considering purchasing second hand equipment from other than a POS vendor, please be aware that: +
-It may be compromised (hacked) +
-The MSR and keys may be worn. +
-You will have to send it somewhere to have the correct firmware, forms and encryption keys loaded. +
-It may no longer be PCI compliant. +
-</code>+
  
 ===== Other information ===== ===== Other information =====
pinpads.txt · Last modified: 2021/08/30 16:54 (8 weeks ago) by plagrada