Differences

This shows you the differences between two versions of the page.

--- pinpads [2019/05/24 10:53 (5 years ago)] – [Ingenico iSC 250] craig
+++ pinpads [2021/08/30 16:54 (3 years ago)] (current) – plagrada
@@ Line 1: / Line 1: @@
 ====== Certified USA EMV PINPads ======
-Important - each pinpad must be EMV certified with each processor. Just because a pinpad has a chip reader, does not mean that it is EMV certified with any or your processor.
+https://newaccount1608055419986.freshdesk.com/a/solutions/articles/66000495033
-===== Worldpay IP (Mercury) =====
-==== VeriFone VX805 with End-to-End Encryption. ====
-  * **This device is now EMV certified with Mercury and System Five.**
-  * This device may be purchased or rented from Mercury Payments or must be purchased though IBC
-  * CHIP / MSR / [[contactless_payments|Contactless]] /PIN
-  * No signature capture
-  * USB 3 meter cables.  Serial or 1 USB meter cables are also available.
-  * XPI Application (Load Version 8.42B)
-{{::vx805.jpg?200|}}\\
-[[Installing Mercury Netepay for US-EMV|Installing Mercury Netepay for US-EMV]]
-=== VeriFone Vx805 for processors other than Worldpay IP (Mercury) ===
-Most processors now support the Vx805 This is what you need to purchase.
-  * Verifone VX805 USB (M280-703-A3-WWA-3)
-  * 3.0M USB Cable Vx805 USB A M (CBL282-038-02-A).  Serial or 1M USB cables are also available.
-  * XPI Application (Load Version 8.42B)
-  * Processor Encryption (processor-specific)
-  * This device is not End-To-End Encrypted.
-  * May be purchased from POS Portal, JRS POS Depot or POSData or IBC.  Please see [[http://www.datacapsystems.com/verifonevx805]] for specific ordering information, distributor links and supported processors.
-==== Ingenico iSC 250 ====
-{{::isc250.jpg?200|}}
-  * Chip / MSR / [[contactless_payments|Contactless]] / Signature
-  * USB  [[http://www.datacapepay.com/downloadmenu/|Device Driver]]
-  * [[http://www.datacapepay.com/downloadmenu/|dsiEMVx version 1.06]] or higher is required.
-  * System Five version version 6.1.2.155 or higher is required.
-  * Chip Card returns and voids must be swiped.
-  * The prompt **Debit with Pin? Yes/No ** is a bit confusing.\\
-    * **Yes** means this is a debit card that requires a PIN,
-    * **No** means this is a credit card.
-  * The Enter key does not work in response to prompts even though the screen button Yes looks like the enter key.
-  * **[[http://www.datacapsystems.com/ingenico-isc250|Information on ordering this device]]**
-===== Equinox L5300 =====
-{{hypercom_l5300.jpg|}}
-<note important>This is only available for Worldpay IP (Mercury) and Chase Paymentech. You must have your supplier install/load the __datacap forms__ and the __debit encryption keys__ before they ship it to you.</note>
-  * PCI out of scope, therefore does not support card on file except with Mercury Tokenization.
-  * Signature Capture
-  * Magnetic Stripe Reader
-  * PIN Entry - Device must have Debit Keys injected for your processor
-  * EMV (Chip)
-  * Optional NFC (MasterCard Paypass, Visa payWave, ApplePay) depending on your processor's ability to process NFC transactions.
-  * USB or RS232 Serial
-  * [[https://www.datacapsystems.com/equinox-l5300|Information on this device]]
-  * :-( Does not work with Terminal Services Serial Port redirection, but can be used with the Remote POS device manager available in System Five version 6.1
-====== Supported USA PINPads (NON-EMV) ======
-**There be dragoons here** - Please read carefully.\\
-  * Ensure your PINPad is encrypted for your payment processor.
-  * Please read the fine print. Not all pinpads will work for all situations. Items to consider:Terminal Services;Serial, USB or TCP/IP;Signature Capture; Card on File.
-  * Some driver installs may be challenging. Please ensure you have at least 2 weeks lead time before going live.
-  * US EMV is not supported. Even though your pinpad may have a chip card reader, chances that it will support EMV when available are slim.
-  * Some PINpads require loading of datacap forms or OPOS drivers by the Supplier or other third party.
-  * If the PINpad you are considering is not on this list, it probably won't work.  Replacement models for obsolete PINpads probably won't work either.
-  * Beware of purchasing second hand equipment from non-POS vendors.
-===== Important Information on Device Location =====
-The pinpad device may be mounted on a flat surface, wall, or customer stand (recommended). We recommend physically securing the device to avoid theft. Power may be provided from a host Point of Sale system or from an Ingenico power supply. The device must be placed close to an easily-accessible power outlet.
-Do not place the pinpad on a PC monitor, adjacent to an electronically active security tag deactivation system, or near other sources of magnetic fields.\\
-|**The Pinpad device must be at least 12 inches away from an electronically active type of security tag**|
-===== Purchase information  =====
-Products Mercury Payment Systems can provide in the USA:
-  * Stand Alone Credit Card Terminals.
-  * Dial Backup Bridge.
-You can purchase PINpads for the United States of America from the following sources.
-<code>
-JR's POS Depot
-Contact:  Luisa Rodas
-TEL (954) 741-3433, x130
-TOL (877) 999-7374
-FAX (253) 238-2414
-http://jrposdepot.com
-[email protected]
-</code>
-<code>
-POS DATA
-Contact:  Becky O'Brien, Regional Business Development Manager
-TEL   310-883-8340
-eMail [email protected]
-web   http://www.posdata.com
-</code>
-<code>
-If you are considering purchasing second hand equipment from other than a POS vendor, please be aware that:
-It may be compromised (hacked)
-The MSR and keys may be worn.
-You will have to send it somewhere to have the correct firmware, forms and encryption keys loaded.
-It may no longer be PCI compliant.
-</code>
 ===== Other information =====