User Tools

Site Tools


preinstallation_checklist

This is an old revision of the document!


System Five Pre-installation Checklist

Overview

This document covers the expected configuration of the server and workstations in order to satisfy the requirements before Pervasive and System Five are installed. Failure to comply with this configuration may result in undesired behaviour, performance issues, or possible data corruption.

If you should need assistance, please speak to your Business Developer, Account Manager or IT Professional.

Standard Server Configuration

Before installing Pervasive and System Five onto the server, first ensure that the server is correctly configured.

1. Ensure that the Power Saving Features on the Network Interface Card (NIC) are turned OFF.

2. While not mandatory, it is recommended to disable TCP/IPv6.

Be careful with disabling TCP/IPv6 as it has been known to cause problems with Windows Small Business Server. It is best to leave this option untouched until a conversation has taken place with your IT professional, and it is fully understood what the potential impact will be to your network.

3. Ensure that a Static IP address is assigned.

4. Ensure that the Server's Power Plan Options is set to High Performance.

If the server is virtualised (e.g., Hyper-V, VMware, XenDesktop, etc.), ensure that the above steps are completed on both the physical and virtual servers.

Standard Workstation Configuration

Before installing Pervasive and System Five onto a workstation, first ensure that the workstation is correctly configured.

1. Ensure that the Power Saving Features on the Network Interface Card (NIC) are turned OFF.

2. While not mandatory, it is recommended to disable TCP/IPv6.

It is best to leave this option untouched until a conversation has taken place with your IT professional, and it is fully understood what the potential impact will be to your network.

3. It is recommended that a Static IP address is assigned in a Client-Server Environment. However, this should be mandatory in a Peer-to-Peer environment.

4. Ensure that that workstation is in the same domain or workgroup as the server.

5. Ensure that the Workstation's Power Plan Options is set to High Performance.

preinstallation_checklist.1475095536.txt.gz · Last modified: 2016/09/28 13:45 (8 years ago) by dcartwright