User Tools

Site Tools


preinstallation_checklist

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
preinstallation_checklist [2016/09/29 14:44 (8 years ago)] dcartwrightpreinstallation_checklist [2020/08/14 16:13 (4 years ago)] (current) – [Disabling Power Saving on NIC in Windows] jege
Line 1: Line 1:
-====== System Five Pre-installation Checklist ======+====== Windward System Five Pre-installation Checklist ======
  
 ===== Overview ===== ===== Overview =====
 This document covers the expected configuration of the server and workstations in order to satisfy the requirements before Pervasive and System Five are installed. Failure to comply with this configuration may result in undesired behaviour, performance issues, or possible data corruption. This document covers the expected configuration of the server and workstations in order to satisfy the requirements before Pervasive and System Five are installed. Failure to comply with this configuration may result in undesired behaviour, performance issues, or possible data corruption.
  
-If you should need assistance, please speak to your Business Developer, Account Manager or IT Professional.+If you should need assistance, please speak to your Business Developer, Account Manageror IT Professional.
  
 ---- ----
Line 28: Line 28:
 ===== Standard Workstation Configuration ===== ===== Standard Workstation Configuration =====
  
-Before installing Pervasive and System Five onto a workstation, first ensure that the workstation is correctly configured.+Before installing Pervasive and System Five onto a workstation, firstensure that the workstation is correctly configured.
  
 1. Ensure that the Power Saving Features on the Network Interface Card (NIC) are turned **OFF**. 1. Ensure that the Power Saving Features on the Network Interface Card (NIC) are turned **OFF**.
Line 46: Line 46:
 5. Ensure that the Workstation's Power Plan Options is set to **High Performance**. 5. Ensure that the Workstation's Power Plan Options is set to **High Performance**.
  
-{{::power_plan_options.png|}}+{{::power_plan_options.png|}}\\ 
 + 
 + 
 +===== Disabling Power Saving on NIC in Windows ===== 
 + 
 +This power saver option causes Windward Data to disconnects if the machine is left idle for a long time. This should be disabled to avoid such a problem. 
 + 
 +To disable this option on Windows 7 Go to Control Panel --> Network Sharing Center--> Change Adapter Settings--> Local Area Connection (Right-Click then Properties)-->Click Configure to open NIC Properties--> Go to Power Management Tab and uncheck "Allow the computer to turn off to save power". See the image below. 
 + 
 +{{:nic1.jpg?500|}} 
 + 
 +\\ 
 + 
 +To disable this option on Windows XP Go to Control Panel --> Network Connection--> Local Area Connection (Right-Click then Properties)-->Click Configure to open NIC Properties--> Go to Power Management Tab and uncheck "Allow the computer to turn off to save power". See the image below. 
 + 
 +{{:nic2.jpg?500|}} 
 + 
 +\\ 
 +Along with this setting, its a good idea to verify the power setting as well. 
 + 
 +Go to Control Panel--> Power Option/Settings--> Set "Turn Off Hard Disks" and "System Standby" option to Never. See the image below. 
 + 
 +{{:nic3.jpg?500|}} 
 + 
 + 
 + 
 + 
 + 
preinstallation_checklist.1475185494.txt.gz · Last modified: 2016/09/29 14:44 (8 years ago) (external edit)