Differences

This shows you the differences between two versions of the page.

--- sp5500_ivans_checklist [2014/10/02 12:55 (10 years ago)] – swind
+++ sp5500_ivans_checklist [2022/02/24 16:49 (2 years ago)] (current) – asegert_windwardsoftware.com
@@ Line 1: / Line 1: @@
 ====== Checklist for configuring Honeywell OptimusS SP5500 batch data collector ======
-[[http://wws5.com/|{{http://wws5.com/images/topxxxgif-ani.gif  |Windward Software}}]]
+<note warning>This Device is NOT SUPPORTED</note>
 ====== Checklist ======
@@ Line 48: / Line 50: @@
      * make sure directory is writable, best create C:\temp directory, and specify it in Optimizer get data dialog.
-     ∗ IR-Cradle
+     * IR-Cradle
      * (Check COM port is correct)
@@ Line 60: / Line 62: @@
 . In System 5, Check command line is correct
-   ** Make sure IR Cradle, and correct COM port are specified in command line parameters **
+** Make sure IR Cradle, and correct COM port are specified in command line parameters **
+Refer to wiki page: http://training.wws5.com/doku.php?id=pos_devices_-_data_collectors.
+Parameters data.txt,2,<COM Port>,1,1,1,1,1,0,0,2
+With the SP5500, “Upload Via” will almost always be 2 (IR Cradle), please check COM port is correct as described from step 1, check in device manager to confirm.
-   refer to wiki page: http://training.wws5.com/doku.php?id=pos_devices_-_data_collectors
-   Parameters data.txt,2,<COM Port>,1,1,1,1,1,0,0,2
-   with SP5500, “Upload Via” will almost always be 2 (IR Cradle), please check COM port is correct as described from step 1, check in device manager to confirm.
+== Ivan Polchenko of IBC ==
-== Ivan Polchenko October 2 2014 ==
+== October 2 2014 ==
 ======
 [[http://mywindward.wws5.com|{{  http://wws5.com/support/images/cust_support_banner_bottom.jpg  |myWindward}}]]