User Tools

Site Tools


supported_peripheral_hardware_list

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
supported_peripheral_hardware_list [2021/02/27 11:13 (6 weeks ago)]
tanya
supported_peripheral_hardware_list [2021/03/01 09:36 (6 weeks ago)] (current)
tanya old revision restored (2020/12/11 13:09)
Line 1: Line 1:
 ====== Windward System Five Supported Peripheral Hardware List ====== ====== Windward System Five Supported Peripheral Hardware List ======
- 
 See [[https://support.windwardsoftware.com/a/solutions/articles/66000382031]] See [[https://support.windwardsoftware.com/a/solutions/articles/66000382031]]
 +
 +The following is a list of hardware that is currently supported by Windward System Five on premises only. 
 +
 +This list **__DOES NOT__**  apply to **Remote Desktop** or **System Five On Cloud solutions**. The hardware devices on this page have only been confirmed to work with on premises installations of System Five.
 +\\
 +\\
 +For hardware that works with [[:s5oc_supported_peripheral_hardware_list|System Five on Cloud click here]]
 +
 +
 +
 +<note important> Windward Software **will no longer support any devices that have reached the manufacturer's end of life**, or are no longer available from the manufacturer.
 +This document is subject to review and may be revised at any time.
 +Please check this page regularly for updates. </note>
 +
 +
 +===== Windward System Five Server and Workstation Requirements =====
 +Please refer to [[system_requirements|Windward System Five Minimum and Recommended System Requirements]] for details pertaining to hardware requirements to run System Five.
 +
 +
 +<color #FAA61A>Windward Software can connect you with hardware: Shop now! [[https://shopposportals.com/collections/windward-software]]</color>
 +===== Supported Peripheral Hardware List =====
 +
 +
 +^  DEVICE  ^  MAKE  ^  MODEL  ^  LINK  ^
 +^Slip Printers{{ ::slip_printer.jpg |}}<color red>Sharing of slip printers or label printers across a network is not recommended. If a slip printer or label printer needs to be accesses by multiple computers on the network it should be a NETWORKABLE printer connected directly to the router or switch.</color>|BIXOLON|SRP-350plusIII|
 +|:::|CITIZEN|TZ30-M01|
 +|:::|DELL|T200|http://wiki.wws5.com/doku.php?id=dell_t200_recept_printer_setup|
 +|:::|Epson|TM-T90|
 +|:::|IBM|Shuremark 4610|http://wiki.wws5.com/doku.php?id=ibm_4610_shuremark_barcode_on_slip|
 +|:::|POS-X|EVO Green (USB/S)|http://ibcworld.net/products/product-types/pos-x-evo-green-usbs|
 +|:::|POS-X|ION Thermal GC13A41172|http://help.ibcworld.net/items/16|
 +|:::|SNBC|BTP-M2002NP|
 +|:::|SNBC|BTP-M280B|
 +|:::|Star|TSP-100, 143, 700| **On Premisis only**. Not recommended for Terminal Services / Remote Desktop|
 +^ ^ ^ ^ ^
 +^ ^ ^ ^ ^
 +^Label Printers{{ :label_printer.jpg |}}|Datamax|E Class DMX-E-4204|DO NOT USE IN REMOTE DESKTOP ENVIRONMENT OR CLOUD. CODE BASED LABELS ONLY http://wiki.wws5.com/doku.php?id=datamax_dmx-e-4204_printer_setup|
 +|:::|Dymo|LabelWriter Twin Turbo|http://wiki.wws5.com/doku.php?id=dymo_labelwriter_twin_turbo_setup|
 +|:::|Godex|EZ-DT4|http://www.godexintl.com/global/product/type/model/DT4x_us|
 +|:::|Sato|CG408DT / CG408DT-LAN|http://wiki.wws5.com/doku.php?id=sato_cg408dt_labels_samples|
 +|:::|Sato|CG408TT-RS|http://wiki.wws5.com/doku.php?id=sato_cg408tt-rs_labels_samples|
 +|:::|Sato|LM408|http://wiki.wws5.com/doku.php?id=sato_lm408_labels_samples|
 +|:::|TSC|TTP-247 Plus (replaces the 245 Plus)|http://wiki.wws5.com/doku.php?do=show&id=tsc_ttp-245_plus_install|
 +|:::|Zebra|TLP-2824 (2 inch Print Head)|http://wiki.wws5.com/doku.php?id=zebra_eltron_label_creation_via_epl2|
 +|:::|Zebra|TLP-2844 (4 inch Print Head)|http://wiki.wws5.com/doku.php?id=zebra_eltron_label_creation_via_epl2|
 +|:::|Zebra|GK420T (4 inch Print Head)|This is a Thermal Transfer label Printer and works from System Five Label Designer.|
 +^ ^ ^ ^ ^
 +^ ^ ^ ^ ^
 +^Industrial Label Printers{{ :industrial_label_printer.jpg |}}|Citizen|CL-S700|http://wiki.wws5.com/doku.php?id=Citizen_CL-S700|
 +^ ^ ^ ^ ^
 +^ ^ ^ ^ ^
 +^Garden Center Label Printers{{ :garden_center_label_printer.jpg |}}|TEC| |http://wiki.wws5.com/doku.php?id=tec_label_printing   TEC printers require code based label design which is not covered under a maintenance plan |
 +|:::|Sato|CL4NX|http://wiki.wws5.com/doku.php?id=sato_cl4nx|
 +|:::|Sato|GL412E|http://wiki.wws5.com/doku.php?id=sato_cl4nx|
 +^ ^ ^ ^ ^
 +^ ^ ^ ^ ^
 +^Fax Modems & Multifunction Printers\\ {{ :hardware:fax.jpg?100 |}}| | | Fax printers (As well as Microsoft Print to Fax) are ONLY supported without phone number pass through functionality.\\ This means that you must manually lookup and type in the customers fax number.\\ Multi recipient faxing and statement faxing through a Fax Modem is no longer supported.|
 +^ ^ ^ ^ ^
 +^ ^ ^ ^ ^
 +^Barcode Scanners{{ :barcode_scanner.jpg |}}|Birch|CD-108e|http://www.birch.com.tw/newpage/leaflets/108e1-02.jpg|
 +|:::|HP| elitepos 2d|http://wiki.wws5.com/doku.php?id=hp_elitepos_2d_barcode_scanner&s[]=hp&s[]=elitepos|
 +|:::|Datalogic| PowerScan PBT9300 |http://wiki.wws5.com/doku.php?id=datalogic_powerscan_pbt9300 http://help.ibcworld.net/items/33|
 +|:::|Datalogic| QuickScan|http://wiki.wws5.com/doku.php?id=datalogic_quickscan http://help.ibcworld.net/items/34|
 +|:::|Datalogic| QuickScan (2D) QD24XX, QM24XX, QBT24XX (Wireless) |http://wiki.wws5.com/doku.php?id=datalogic_quickscan_2d http://help.ibcworld.net/items/29|
 +|:::|Metrologic \ Honeywell \ Unitech|3800G|http://wiki.wws5.com/doku.php?id=honeywell_3800g|
 +|:::|Metrologic \ Honeywell \ Unitech|1452G|http://wiki.wws5.com/doku.php?id=honeywell_3800g|
 +|:::|Metrologic \ Honeywell \ Unitech|Eclipse MS5145|http://wiki.wws5.com/doku.php?id=honeywell_eclipse_ms5145|
 +|:::|Metrologic \ Honeywell \ Unitech|MS-2020|http://wiki.wws5.com/doku.php?id=pos_devices_-_opos_drivers|
 +|:::|Metrologic \ Honeywell \ Unitech|MS-9540|http://country.honeywellaidc.com/en-AP/Pages/Product.aspx?category=hand-held-barcode-scanner&cat=HSM&pid=9520/40
 +|:::|Metrologic \ Honeywell \ Unitech|Orbit 7120|http://wiki.wws5.com/doku.php?id=faq:scanners:metrologic_series|
 +|:::|Metrologic \ Honeywell \ Unitech|Voyager MS-9540|http://wiki.wws5.com/doku.php?id=metrologic_voyager_ms9540|
 +|:::|Metrologic \ Honeywell \ Unitech|Xenon 1900 (2D)|http://wiki.wws5.com/doku.php?id=honeywell_xenon_1900_2d_barcode_scanner|
 +|:::|Motorola \ Symbol \Zebra|LS2208|http://wiki.wws5.com/lib/exe/fetch.php?media=barcodescan:symbol_ls2208.pdf|
 +|:::|Motorola \ Symbol \ Zebra|DS4208 for 1D/2D|http://wiki.wws5.com/doku.php?id=motorola_cs4070_companion_scanner|
 +|:::|Motorola \ Symbol \ Zebra|LI4278|http://wiki.wws5.com/doku.php?id=motorola_ds4208_2d_scanner http://help.ibcworld.net/items/2|
 +|:::|POS-X|EVO (1D)|http://wiki.wws5.com/doku.php?id=faq:ibc_equipment_setup http://help.ibcworld.net/items/3|
 +|:::|POS-X|EVO (2D)|http://wiki.wws5.com/doku.php?id=faq:ibc_equipment_setup http://help.ibcworld.net/items/13|
 +|:::|POS-X|EVO-OMNI (2D)|http://wiki.wws5.com/doku.php?id=faq:ibc_equipment_setup|
 +|:::|POS-X|EVO-PS1-ADU (2D)|http://wiki.wws5.com/doku.php?id=faq:ibc_equipment_setup#pos-x_evo-ps1-edu|
 +|:::|POS-X|ION Wireless|http://wiki.wws5.com/doku.php?id=pos-x_ion_linear_wireless_configuration http://help.ibcworld.net/items/21|
 +|:::|POS-X|XI3000|http://www.pos-x.com/pos-system-hardware/barcode-scanners/xi3000/|
 +|:::|POS-X|XI3200|http://www.pos-x.com/pos-system-hardware/barcode-scanners/xi3200/|
 +|:::|Wasp|WASP WLR8950|http://wiki.wws5.com/doku.php?id=wasp_wlr8950|
 +|:::|Wasp|Wasp WWS100i Bluetooth Scanner|http://wiki.wws5.com/doku.php?id=wasp_wws100i_bluetooth_scanner|
 +|:::|Wasp|Wasp WWS-500 scanner|http://wiki.wws5.com/doku.php?id=faq:scanners:wasp_wws500|
 +|:::|Wasp|WWS-800|http://wiki.wws5.com/doku.php?id=faq:wasp800|
 +|:::|Wasp|WWS-850L|http://www.waspbarcode.com/barcode-scanners/wws850-freedom-barcode-scanner|
 +|:::|Zebex|Z-3010|http://wiki.wws5.com/doku.php?id=zebex_z-3010_barcode_scanner|
 +^ ^ ^ ^ ^
 +^ ^ ^ ^ ^
 +^PIN Pads{{:hardware:pinpads:pinpads.jpg?200|}}^ For information concerning PIN pads and Credit Card processing, please refer to the Subject Master Document, found here [[projects:implementation_areas:credit_cards_subject_master| --- MORE INFO --- ]] ^||
 +|:::|Ingenico|ICT250|Canada – semi-integrated in progress. Alternative for Moneris Vx810|
 +|:::|Ingenico|iSC250|Supported for US EMV. [[http://wiki.wws5.com/doku.php?id=isc250_configuration|Ingenico ISC 250 Setup ]] |
 +|:::|Ingenico|iPP320|Supported for Beta Customers only at this time. http://wiki.wws5.com/doku.php?id=moneris_pinpads#moneris_pospad_emv_chip_pin_contactless|
 +|:::|VeriFone|P400|Moneris Canada & WorldPay US|
 +|:::|VeriFone|Mx915|Not supported for EMV.|
 +|:::|VeriFone|SE1000|Not supported for EMV.|
 +|:::|VeriFone|Vx805|Supported in US EMV.|
 +|:::|VeriFone|Vx810|Canada - Being phased out but no replacement yet. US – no longer manufactured. Currently only refurbished ones are available for emergencies.|
 +|:::|VeriFone|Vx820|Now supported in Canada by Vantiv and Paymentech for EMV and Contactless.Requires Datacap Version 5.06.10, DSIEMVClientX version v1.27 and Verifone Vx820 PIN pad running XPI 12.08.16|
 +^ ^ ^ ^ ^
 +^ ^ ^ ^ ^
 +^Signature Captures{{ :signature_captures.jpg |}}|Topaz|SignatureGem LCD T-LBK462-HSB-R|http://ibcworld.net/products/product-types/topaz-signaturegem-lcd-1x5-electronic-signature-pad/|
 +|:::|Topaz|SignatureGem Non-LCD|www.sigpluspro.com/sigplus|
 +|:::| |Signature Capture Setup |http://wiki.wws5.com/doku.php?id=faq:setup_signature_capture|
 +^ ^ ^ ^ ^
 +^ ^ ^ ^ ^
 +^MSR Card Swipe{{ :msr_card_swipe.jpg |}}|POS-X|XM95 (Discontinued)|http://ibcworld.net/products/product-types/xm95u/|
 +|:::|POS-X|EVO-MR1|https://ibcworld.net/products/pos-x-3-track-magnetic-swipe-reader-usb/|
 +^ ^ ^ ^ ^
 +^ ^ ^ ^ ^
 +^Pole Displays{{ :pole_displays.jpg |}}|POS-X|Xp8200 (USB)|http://wiki.wws5.com/doku.php?id=faq:ibc_equipment_setup|
 +^ ^ ^ ^ ^
 +^ ^ ^ ^ ^
 +^Cash Drawers{{ :cash_drawer.jpg |}}|POS-X|ION-C16A-1B|http://wiki.wws5.com/doku.php?id=faq:ibc_equipment_setup|
 +|:::|Logic Controls|CR3000| 
 +|:::|Technical Tip||The cash drawer will need to be connected to the Slip Printer or to a special card in the workstation. Make sure you order compatible parts along with the cables.|
 +^ ^ ^ ^ ^
 +^ ^ ^ ^ ^
 +^Weigh Scales{{ :weigh_scales.jpg |}}|Metrologic \ Honeywell \ Unitech|MS-2320|http://wiki.wws5.com/doku.php?id=pos_devices_-_opos_drivers|
 +^ ^ ^ ^ ^
 +^ ^ ^ ^ ^
 +^Packages{{ :ibc_packages.jpg |}}| | |Windward Software can connect you with hardware: Shop now! [[https://shopposportals.com/collections/windward-software]]/|
 +^ ^ ^ ^ ^
 +^ ^ ^ ^ ^
 +
 +====== Additional Links ======
 +
 +===== Networking Best Practices =====
 +
 +http://wiki.wws5.com/doku.php?id=faq:windows_networking_best_practices
 +
 +
 +
 +===== Networking Multiple Locations Best Practices =====
 +
 +http://wiki.wws5.com/doku.php?id=faq:multilocation_networking_best_practices
 +
 +
 +
 +
 +== Updated by Steve Wind Aug 20 2018 ==
supported_peripheral_hardware_list.txt · Last modified: 2021/03/01 09:36 (6 weeks ago) by tanya