User Tools

Site Tools


supported_peripheral_hardware_list

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
supported_peripheral_hardware_list [2019/11/21 16:05 (4 years ago)] swindsupported_peripheral_hardware_list [2024/01/31 10:52 (8 weeks ago)] (current) – PIN Pad Support Changes Post Review asegert_windwardsoftware.com
Line 1: Line 1:
- 
- 
 ====== Windward System Five Supported Peripheral Hardware List ====== ====== Windward System Five Supported Peripheral Hardware List ======
  
 +The following is a list of hardware that is currently supported by Windward System Five. 
  
 +<note important> Windward Software **will no longer support any devices that have reached the manufacturer's end of life**, or are no longer available from the manufacturer.
 +This document is subject to review and may be revised at any time.
 +Please check this page regularly for updates. </note>
 +\\
 +Note: Most Hardware supported for Windward System Five on Cloud will require setup of the [[employee:rdp_virtual_channel_setup|RDP Virtual Channel and the Remote POS Device Manager]] on the local workstation.\\
 +\\
 +\\
 +===== Windward System Five Server and Workstation Requirements =====
  
-===== The following is a list of hardware that is currently supported by Windward System Five on premises only=====   +Please refer to [[system_requirements|Windward System Five Minimum and Recommended System Requirements]] for details pertaining to hardware requirements to run System Five.
  
-<note important> This list **__doesn't__**  apply to **Remote Desktop** or **System Five On Cloud solutions**. The hardware devices on this page have only been confirmed to work with on premises installations of System Five. 
 \\ \\
 \\ \\
-For System Five on Cloud, refer to the following Wiki: http://wiki.wws5.com/doku.php?id=s5oc_supported_peripheral_hardware_list +===== Supported Peripheral Hardware List =====
-</note>+
  
 +^  {{ ::slip_printer.jpg }}**Slip Printers**  ^^^^^
 +^  <color red>Sharing of slip printers or label printers across a network is not recommended. If a slip printer or label printer needs to be accesses by multiple computers on the network it should be a NETWORKABLE printer connected directly to the router or switch.</color>  ^^^^^
 +^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^
 +|BIXOLON|SRP-350 plusIII|  [[https://shopposportals.com/collections/windward-software/products/bixolon-srp-350plusiiicopg-thermal-printer-parallel-usb-ethernet-black-p-s-usb-cable-incl|{{:windward_supported_hardware_list:onprem-buynow.png}}]]  |  [[https://shopposportals.com/collections/windward-system-five-on-cloud/products/bixolon-srp-350plusiiicopg-thermal-printer-parallel-usb-ethernet-black-p-s-usb-cable-incl|{{:windward_supported_hardware_list:oncloud-buynow.png}}]]  |
 +|DELL|T200|  **Supported**  |  <color grey>**Testing Required**</color>  |[[http://wiki.wws5.com/doku.php?id=dell_t200_recept_printer_setup|Windward On-Prem Setup]]|
 +|Epson|TM-T88|  [[https://shopposportals.com/collections/windward-software/products/epson-tm-t88v-thermal-receipt-printer-usb-parallel-interfaces-gray-cable-required|{{:windward_supported_hardware_list:onprem-buynow.png}}]]  |  [[https://shopposportals.com/collections/windward-system-five-on-cloud/products/epson-tm-t88v-thermal-receipt-printer-usb-parallel-interfaces-gray-cable-required|{{:windward_supported_hardware_list:oncloud-buynow.png}}]]  |
 +|POS-X|EVO Green (USB/S)|  **Supported**  |  <color grey>**Testing Required**</color>  |
 +^  **Legacy Devices**  ^^^^^
 +^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^
 +|CITIZEN|TZ30-M01|  <color red>**LIMITED SUPPORT***</color>  |  <color red>**LIMITED SUPPORT***</color>  |
 +|Epson|TM-T90|  <color red>**LIMITED SUPPORT***</color>  |  <color red>**LIMITED SUPPORT***</color>  |
 +|IBM|Shuremark 4610|  <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color>  |  This Device will reach end of support January 2025  [[http://wiki.wws5.com/doku.php?id=ibm_4610_shuremark_barcode_on_slip|Windward On-Prem Setup]]  |
 +|POS-X|ION Thermal GC13A41172|  <color red>**LIMITED SUPPORT***</color>  |  <color red>**LIMITED SUPPORT***</color>  |
 +|Star|TSP-100, 143, 700|  [[https://shopposportals.com/collections/windward-software/products/star-micronics-ethernet-tsp143iiilan-thermal-receipt-printer|{{:windward_supported_hardware_list:onprem-buynow.png}}]]<color red>**LIMITED SUPPORT***</color>  |  [[https://shopposportals.com/collections/windward-system-five-on-cloud/products/star-micronics-ethernet-tsp143iiilan-thermal-receipt-printer|{{:windward_supported_hardware_list:oncloud-buynow.png}}]]<color red>**LIMITED SUPPORT***</color>  |
 +You can request support for a new device:[[https://forms.office.com/Pages/ResponsePage.aspx?id=7JbGdftbkkiaDJGHqQYc1nHLbNQEMstChWN01YsFycZUNkRRTjNYVDhNOTdUV1FGQzlGNjFNMElQUS4u|Windward Software Hardware Request]]
 +\\
 +*On-Prem is defined as System 5 installed on a Physical Server
 +\\ *OnCloud is defined as System 5 hosted in our Cloud environment
  
-<note important> Windward Software will no longer support any devices that have reached the manufacturer'end of life, or are no longer available from the manufacturer+^  {{ :label_printer.jpg  }}**Label Printers**  ^^^^^ 
-This document is subject to review and may be revised at any time+^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^ 
-Please check this page regularly for updates</note>+|TSC|TTP-247 Plus|  **Supported**  |  <color grey>**Testing Required**</color>  |  [[http://wiki.wws5.com/doku.php?do=show&id=tsc_ttp-245_plus_install|Windward On-Prem Setup]] 
 +^  **Legacy Devices**  ^^^^^ 
 +^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^ 
 +|Dymo|LabelWriter Twin Turbo|  [[https://shopposportals.com/collections/windward-software/products/dymo-printer-label-writer-450-twin-turbo|{{:windward_supported_hardware_list:onprem-buynow.png}}]] <color red>**LIMITED SUPPORT***</color>  |  <color grey>**NOT SUPPORTED ON CLOUD**</color>  |  This Device will reach end of support January 2025 [[http://wiki.wws5.com/doku.php?id=dymo_labelwriter_twin_turbo_setup |Windward On-Prem Setup]] | 
 +|Godex|EZ-DT4|  <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color> 
 +|Sato|CG408DT / CG408DT-LAN|  <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color>  |    [[http://wiki.wws5.com/doku.php?id=sato_cg408dt_labels_samples |Windward On-Prem Setup]] 
 +|Sato|CG408TT-RS|  <color red>**LIMITED SUPPORT***</color>  |  <color red>**LIMITED SUPPORT***</color>  |    This Device will reach end of support July 2024 [[http://wiki.wws5.com/doku.php?id=sato_cg408tt-rs_labels_samples|Windward On-Prem Setup]]  | 
 +|Sato|LM408|  <color red>**LIMITED SUPPORT***</color>  |  <color red>**LIMITED SUPPORT***</color>  |  This Device will reach end of support July 2024   [[http://wiki.wws5.com/doku.php?id=sato_lm408_labels_samples|Windward On-Prem Setup]] 
 +|Zebra|TLP-2824 (2 inch Print Head)|  [[https://shopposportals.com/collections/windward-system-five-on-cloud/products/zebra-ait-tlp2824-plus-ethernet-barcode-label-printer|{{:windward_supported_hardware_list:onprem-buynow.png}}]] <color red>**LIMITED SUPPORT***</color>  |  [[https://shopposportals.com/collections/windward-system-five-on-cloud/products/zebra-ait-tlp2824-plus-ethernet-barcode-label-printer|{{:windward_supported_hardware_list:oncloud-buynow.png}}]] <color red>**LIMITED SUPPORT***</color>  |    This Device will reach end of support January 2025  | 
 +|Zebra|TLP-2844 (4 inch Print Head)|  <color red>**LIMITED SUPPORT***</color>  |  <color red>**LIMITED SUPPORT***</color>  |    This Device will reach end of support January 2025 [[http://wiki.wws5.com/doku.php?id=zebra_eltron_label_creation_via_epl2|Windward On-Prem Setup]] 
 +|Zebra|GK420T (4 inch Print Head)|  <color red>**LIMITED SUPPORT***</color>  |  <color red>**LIMITED SUPPORT***</color>  |  This Device will reach end of support January 2025 This is a Thermal Transfer label Printer and works from System Five Label Designer.| 
 +You can request support for a new device:[[https://forms.office.com/Pages/ResponsePage.aspx?id=7JbGdftbkkiaDJGHqQYc1nHLbNQEMstChWN01YsFycZUNkRRTjNYVDhNOTdUV1FGQzlGNjFNMElQUS4u|Windward Software Hardware Request]] 
 +\\ 
 +*On-Prem is defined as System 5 installed on a Physical Server 
 +\\ *OnCloud is defined as System 5 hosted in our Cloud environment
  
-<note important> Sharing of slip printers or label printers across a network is not recommendedIf a slip printer or label printer needs to be accesses by multiple computers on the network it should be a NETWORKABLE printer connected directly to the router or switch. </note>+^  {{ :industrial_label_printer.jpg  }}**Industrial Label Printers**  ^^^^^ 
 +^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^
  
 +^  **Legacy Devices**  ^^^^^
 +^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^
 +|Citizen|CL-S700|  [[https://shopposportals.com/collections/windward-software/products/citizen-cl-s700-industrial-barcode-printer-direct-thermal-and-thermal-transfer-203-dpi-ethernet|{{:windward_supported_hardware_list:onprem-buynow.png}}]] <html><br></html><color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color>  |  [[http://wiki.wws5.com/doku.php?id=Citizen_CL-S700|Windward On-Prem Setup]]  |
 +You can request support for a new device:[[https://forms.office.com/Pages/ResponsePage.aspx?id=7JbGdftbkkiaDJGHqQYc1nHLbNQEMstChWN01YsFycZUNkRRTjNYVDhNOTdUV1FGQzlGNjFNMElQUS4u|Windward Software Hardware Request]]
 +\\
 +*On-Prem is defined as System 5 installed on a Physical Server
 +\\ *OnCloud is defined as System 5 hosted in our Cloud environment
  
-===== Windward System Five Server and Workstation Requirements ===== +^  {{ :garden_center_label_printer.jpg  }}**Garden Center Label Printers**  ^^^^^ 
-Please refer to [[system_requirements|Windward System Five Minimum and Recommended System Requirements]] for details pertaining to hardware requirements to run System Five.+^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^ 
 +|Sato|CL4NX|  [[https://shopposportals.com/collections/windward-software/products/sato-cl4nx-plus-industrial-label-printer-305dpi-4-1-thermal-transfer-printer-lan-usb-ser-bluetooth|{{:windward_supported_hardware_list:onprem-buynow.png}}]]  |  <color grey>**Testing Required**</color>  |  [[http://wiki.wws5.com/doku.php?id=sato_cl4nx|Windward On-Prem Setup]]  
 +^  **Legacy Devices**  ^^^^^ 
 +^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^ 
 +|Sato|GL412E|  <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color>  |  This Device will reach end of support January 2025 [[http://wiki.wws5.com/doku.php?id=sato_cl4nx|Windward On-Prem Setup]]  | 
 +|TEC|B-SX4T|  <color grey>**Testing Required**</color>  |  <color red>**LIMITED SUPPORT***</color>  |  Code-based labels have been tested to work in the Cloud for as long as it's using the native driver and NOT the Easy Print Driver  |
  
-===== Supported Peripheral Hardware List =====+You can request support for a new device:[[https://forms.office.com/Pages/ResponsePage.aspx?id=7JbGdftbkkiaDJGHqQYc1nHLbNQEMstChWN01YsFycZUNkRRTjNYVDhNOTdUV1FGQzlGNjFNMElQUS4u|Windward Software Hardware Request]] 
 +\\ 
 +*On-Prem is defined as System 5 installed on a Physical Server 
 +\\ *OnCloud is defined as System 5 hosted in our Cloud environment
  
 +^  {{ :hardware:fax.jpg?100  }}**Fax Modems & Multifunction Printers**  ^^^^^
 +^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^
 +| | | Fax printers (As well as Microsoft Print to Fax) are ONLY supported without phone number pass through functionality.\\ This means that you must manually lookup and type in the customers fax number.\\ Multi recipient faxing and statement faxing through a Fax Modem is no longer supported.|  <color grey>**Testing Required**</color>  |
 +You can request support for a new device:[[https://forms.office.com/Pages/ResponsePage.aspx?id=7JbGdftbkkiaDJGHqQYc1nHLbNQEMstChWN01YsFycZUNkRRTjNYVDhNOTdUV1FGQzlGNjFNMElQUS4u|Windward Software Hardware Request]]
 +\\
 +*On-Prem is defined as System 5 installed on a Physical Server
 +\\ *OnCloud is defined as System 5 hosted in our Cloud environment
  
-^  DEVICE   MAKE  ^  MODEL  ^  LINK  ^ +^  {{ :barcode_scanner.jpg  }}**Barcode Scanners**  ^^^^^ 
-^Slip Printers{{ ::slip_printer.jpg |}}|BIXOLON|SRP-350plusIII| +^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*   SUPPORTED ON CLOUD*   NOTES 
-|:::|CITIZEN|TZ30-M01+|Birch|CD-108e **Supported**   <color grey>**Testing Required**</color>  
-|:::|DELL|T200|http://wiki.wws5.com/doku.php?id=dell_t200_recept_printer_setup| +|HPelitepos 2d **Supported**   <color grey>**Testing Required**</color>  |  [[http://wiki.wws5.com/doku.php?id=hp_elitepos_2d_barcode_scanner&s[]=hp&s[]=elitepos|Windward On-Prem Setup]]  
-|:::|Epson|TM-T90+|DatalogicHuron HD3130 **Supported**   <color grey>**Testing Required**</color>  |  [[https://wiki.windwardsoftware.com/doku.php?id=datalogic_quickscan_i_qd2131|Windward On-Prem Setup]]  
-|:::|IBM|Shuremark 4610|http://wiki.wws5.com/doku.php?id=ibm_4610_shuremark_barcode_on_slip+|InateckP7 **Supported**  |  <color grey>**Testing Required**</color>   [[https://wiki.windwardsoftware.com/doku.php?id=inateck_p7_barcode_scanner|Windward On-Prem Setup]]  
-|:::|POS-X|EVO Green (USB/S)|http://ibcworld.net/products/product-types/pos-x-evo-green-usbs+|Zebra|LS2208 **Supported**   <color grey>**Testing Required**</color>  |  [[http://wiki.wws5.com/lib/exe/fetch.php?media=barcodescan:symbol_ls2208.pdf|Windward On-Prem Setup]]  
-|:::|POS-X|ION Thermal GC13A41172|http://help.ibcworld.net/items/16+|Zebra|LI4278 **Supported**  |  <color grey>**Testing Required**</color>  |  
-|:::|SNBC|BTP-M2002NP+|POS-X|EVO (1D) **Supported**  |  <color grey>**Testing Required**</color> 
-|:::|SNBC|BTP-M280B+|POS-X|EVO (2D)|  **Supported**  |  **Supported**  
-|:::|Star|TSP-100, 143, 700| **On Premisis only**. Not recommended for Terminal Services Remote Desktop+|Wasp|WASP WLR8950 **Supported**   <color grey>**Testing Required**</color>  |  [[http://wiki.wws5.com/doku.php?id=wasp_wlr8950|Windward On-Prem Setup]]  
-^ ^ ^ ^ ^ +^  **Legacy Devices**  ^^^^^ 
-^ ^ ^ ^ ^ + MAKE   MODEL   SUPPORTED ON-PREM*   SUPPORTED ON CLOUD*   NOTES  ^ 
-^Label Printers{{ :label_printer.jpg |}}|Datamax|E Class DMX-E-4204|DO NOT USE IN REMOTE DESKTOP ENVIRONMENT OR CLOUD. CODE BASED LABELS ONLY http://wiki.wws5.com/doku.php?id=datamax_dmx-e-4204_printer_setup+|Datalogic| PowerScan PBT9300 |  [[https://shopposportals.com/collections/windward-software/products/datalogic-adc-powerscan-pbt9300-auto-ranging-removable-batt-usb-kit-us-incl-scanner-bt-base-usb-cable|{{:windward_supported_hardware_list:onprem-buynow.png}}]]<color red>**LIMITED SUPPORT***</color>   <color grey>**Testing Required**</color>   [[http://wiki.wws5.com/doku.php?id=datalogic_powerscan_pbt9300|Windward On-Prem Setup]]  
-|:::|Dymo|LabelWriter Twin Turbo|http://wiki.wws5.com/doku.php?id=dymo_labelwriter_twin_turbo_setup+|Datalogic| QuickScan|  [[https://shopposportals.com/collections/windward-software/products/datalogic-adc-quickscan-qd2430-2d-area-imager-usb-kit-with-cable-and-stand-black|{{:windward_supported_hardware_list:onprem-buynow.png}}]]<color red>**LIMITED SUPPORT***</color>   <color grey>**Testing Required**</color>   [[http://wiki.wws5.com/doku.php?id=datalogic_quickscan|Windward On-Prem Setup]]  
-|:::|Godex|EZ-DT4|http://www.godexintl.com/global/product/type/model/DT4x_us+|Datalogic| QuickScan(2D) (QD24XX, QM24XX, QBT24XX (Wireless)) |  <color red>**LIMITED SUPPORT***</color>  |  [[https://shopposportals.com/collections/windward-system-five-on-cloud/products/datalogic-adc-quickscan-qd2430-2d-area-imager-usb-kit-with-cable-and-stand-black|{{:windward_supported_hardware_list:oncloud-buynow.png}}]]<color red>**LIMITED SUPPORT***</color>   [[http://wiki.wws5.com/doku.php?id=datalogic_quickscan_2d|Windward On-Prem Setup]] 
-|:::|Sato|CG408DT CG408DT-LAN|http://wiki.wws5.com/doku.php?id=sato_cg408dt_labels_samples+|Honeywell|1452G|  <color red>**LIMITED SUPPORT***</color>  |  <color red>**LIMITED SUPPORT***</color>  |  This Device will reach end of support July 2024[[http://wiki.wws5.com/doku.php?id=honeywell_3800g|Windward On-Prem Setup]]  
-|:::|Sato|CG408TT-RS|http://wiki.wws5.com/doku.php?id=sato_cg408tt-rs_labels_samples+|Honeywell|3800G <color red>**LIMITED SUPPORT***</color>   <color grey>**Testing Required**</color>  |  [[http://wiki.wws5.com/doku.php?id=honeywell_3800g|Windward On-Prem Setup]]  
-|:::|Sato|LM408|http://wiki.wws5.com/doku.php?id=sato_lm408_labels_samples+|Honeywell|Eclipse MS5145|  <color red>**LIMITED SUPPORT***</color>  |  <color red>**LIMITED SUPPORT***</color>  |  This Device will reach end of support January 2025[[http://wiki.wws5.com/doku.php?id=honeywell_eclipse_ms5145|Windward On-Prem Setup]] 
-|:::|TSC|TTP-247 Plus (replaces the 245 Plus)|http://wiki.wws5.com/doku.php?do=show&id=tsc_ttp-245_plus_install+|Honeywell|MS-2020 <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color>  |  [[http://wiki.wws5.com/doku.php?id=pos_devices_-_opos_drivers|Windward On-Prem Setup]]  |  
-|:::|Zebra|TLP-2824 (2 inch Print Head)|http://wiki.wws5.com/doku.php?id=zebra_eltron_label_creation_via_epl2+|Honeywell|Orbit 7120|  [[https://shopposportals.com/collections/windward-software/products/honeywell-ms7120-orbit-7120-omnidirectional-laser-barcode-scanner|{{:windward_supported_hardware_list:onprem-buynow.png}}]]<color red>**LIMITED SUPPORT***</color>     [[https://shopposportals.com/collections/windward-software/products/honeywell-ms7120-orbit-7120-omnidirectional-laser-barcode-scanner|{{:windward_supported_hardware_list:oncloud-buynow.png}}]]<color red>**LIMITED SUPPORT***</color>   [[http://wiki.wws5.com/doku.php?id=faq:scanners:metrologic_series|Windward On-Prem Setup]]  |  
-|:::|Zebra|TLP-2844 (4 inch Print Head)|http://wiki.wws5.com/doku.php?id=zebra_eltron_label_creation_via_epl2+|Honeywell|Voyager MS-9540|  [[https://shopposportals.com/collections/windward-software/products/honeywell-ms9540-voyager-cg-kit-scanner-black-usb-with-stand-coiled-low-speed-usb-direct-cable-documentation|{{:windward_supported_hardware_list:onprem-buynow.png}}]]<color red>**LIMITED SUPPORT***</color>   <color grey>**Testing Required**</color>   [[http://wiki.wws5.com/doku.php?id=metrologic_voyager_ms9540|Windward On-Prem Setup]] 
-|:::|Zebra|GK420T (4 inch Print Head)|This is a Thermal Transfer label Printer and works from System Five Label Designer.|+|Honeywell|Xenon 1900 (2D)|  <color red>**LIMITED SUPPORT***</color> |  <color grey>**Testing Required**</color>  |  [[http://wiki.wws5.com/doku.php?id=honeywell_xenon_1900_2d_barcode_scanner|Windward On-Prem Setup]] 
 +|Zebra|DS4208 for 1D/2D|  <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color>  |  This Device will reach end of support January 2025 [[http://wiki.wws5.com/doku.php?id=motorola_ds4208_2d_scanner|Windward On-Prem Setup]]  
 +|POS-X|XI3000|  <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color>  |  This Device will reach end of support January 2025 [[http://www.pos-x.com/pos-system-hardware/barcode-scanners/xi3000/|Windward On-Prem Setup]] 
 +|POS-X|XI3200|  <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color>  |  This Device will reach end of support January 2025 [[http://www.pos-x.com/pos-system-hardware/barcode-scanners/xi3200/|Windward On-Prem Setup]]  | 
 +|POS-X|EVO-OMNI (2D)|  <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color> 
 +|POS-X|EVO-PS1-ADU (2D)|  <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color> 
 +|POS-X|ION Wireless|  <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color>  |  [[http://wiki.wws5.com/doku.php?id=pos-x_ion_linear_wireless_configuration|Windward On-Prem Setup]]  
 +|Wasp|WWS-800|  <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color>  |  This Device will reach end of support January 2025 [[http://wiki.wws5.com/doku.php?id=faq:wasp800|Windward On-Prem Setup]]  | 
 +|Wasp|Wasp WWS100i Bluetooth Scanner|  <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color>  |  [[http://wiki.wws5.com/doku.php?id=wasp_wws100i_bluetooth_scanner|Windward On-Prem Setup]]  
 +|Wasp|Wasp WWS-500 scanner|  <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color>  |  [[http://wiki.wws5.com/doku.php?id=faq:scanners:wasp_wws500|Windward On-Prem Setup]]  | 
 +|Wasp|WWS-850L|  <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color> 
 +|Zebex|Z-3010|  <color red>**LIMITED SUPPORT***</color>  |  <color grey>**Testing Required**</color>  |  This Device will reach end of support January 2025 [[http://wiki.wws5.com/doku.php?id=zebex_z-3010_barcode_scanner|Windward On-Prem Setup]]  |
  
-^ ^ ^ ^ ^ +You can request support for new device:[[https://forms.office.com/Pages/ResponsePage.aspx?id=7JbGdftbkkiaDJGHqQYc1nHLbNQEMstChWN01YsFycZUNkRRTjNYVDhNOTdUV1FGQzlGNjFNMElQUS4u|Windward Software Hardware Request]] 
-^ ^ ^ ^ ^ +\\ 
-^Industrial Label Printers{{ :industrial_label_printer.jpg |}}|Citizen|CL-S700|http://wiki.wws5.com/doku.php?id=Citizen_CL-S700| +*On-Prem is defined as System installed on a Physical Server 
-^ ^ ^ ^ ^ +\\ *OnCloud is defined as System 5 hosted in our Cloud environment
-^ ^ ^ ^ ^ +
-^Garden Center Label Printers{{ :garden_center_label_printer.jpg |}}|TEC| |http://wiki.wws5.com/doku.php?id=tec_label_printing   TEC printers require code based label design which is not covered under maintenance plan | +
-|:::|Sato|CL4NX|http://wiki.wws5.com/doku.php?id=sato_cl4nx| +
-|:::|Sato|GL412E|http://wiki.wws5.com/doku.php?id=sato_cl4nx| +
-^ ^ ^ ^ ^ +
-^ ^ ^ ^ ^ +
-^Fax Modems & Multifunction Printers\\ {{ :hardware:fax.jpg?100 |}}| | | Fax printers (As well as Microsoft Print to Fax) are ONLY supported without phone number pass through functionality.\\ This means that you must manually lookup and type in the customers fax number.\\ Multi recipient faxing and statement faxing through a Fax Modem is no longer supported.| +
-^ ^ ^ ^ ^ +
-^ ^ ^ ^ ^ +
-^Barcode Scanners{{ :barcode_scanner.jpg |}}|Birch|CD-108e|http://www.birch.com.tw/newpage/leaflets/108e1-02.jpg| +
-|:::|HP| elitepos 2d|http://wiki.wws5.com/doku.php?id=hp_elitepos_2d_barcode_scanner&s[]=hp&s[]=elitepos| +
-|:::|Datalogic| PowerScan PBT9300 |http://wiki.wws5.com/doku.php?id=datalogic_powerscan_pbt9300 http://help.ibcworld.net/items/33| +
-|:::|Datalogic| QuickScan|http://wiki.wws5.com/doku.php?id=datalogic_quickscan http://help.ibcworld.net/items/34| +
-|:::|Datalogic| QuickScan (2D) QD24XX, QM24XX, QBT24XX (Wireless) |http://wiki.wws5.com/doku.php?id=datalogic_quickscan_2d http://help.ibcworld.net/items/29| +
-|:::|Metrologic \ Honeywell \ Unitech|3800G|http://wiki.wws5.com/doku.php?id=honeywell_3800g| +
-|:::|Metrologic \ Honeywell \ Unitech|1452G|http://wiki.wws5.com/doku.php?id=honeywell_3800g| +
-|:::|Metrologic \ Honeywell \ Unitech|Eclipse MS5145|http://wiki.wws5.com/doku.php?id=honeywell_eclipse_ms5145| +
-|:::|Metrologic \ Honeywell \ Unitech|MS-2020|http://wiki.wws5.com/doku.php?id=pos_devices_-_opos_drivers| +
-|:::|Metrologic \ Honeywell \ Unitech|MS-9540|http://country.honeywellaidc.com/en-AP/Pages/Product.aspx?category=hand-held-barcode-scanner&cat=HSM&pid=9520/40 +
-|:::|Metrologic \ Honeywell \ Unitech|Orbit 7120|http://country.honeywellaidc.com/en-AP/Pages/Product.aspx?category=hands-free-barcode-scanner&cat=HSM&pid=7120| +
-|:::|Metrologic \ Honeywell \ Unitech|Voyager MS-9540|http://wiki.wws5.com/doku.php?id=metrologic_voyager_ms9540+
-|:::|Metrologic Honeywell Unitech|Xenon 1900 (2D)|http://wiki.wws5.com/doku.php?id=honeywell_xenon_1900_2d_barcode_scanner| +
-|:::|Motorola \ Symbol \Zebra|LS2208|http://wiki.wws5.com/doku.php?id=faq:programming_a_symbol_ls_2208_barcode_scanner| +
-|:::|Motorola \ Symbol \ Zebra|DS4208 for 1D/2D|http://wiki.wws5.com/doku.php?id=motorola_cs4070_companion_scanner| +
-|:::|Motorola \ Symbol \ Zebra|LI4278|http://wiki.wws5.com/doku.php?id=motorola_ds4208_2d_scanner http://help.ibcworld.net/items/2| +
-|:::|POS-X|EVO (1D)|http://wiki.wws5.com/doku.php?id=faq:ibc_equipment_setup http://help.ibcworld.net/items/3| +
-|:::|POS-X|EVO (2D)|http://wiki.wws5.com/doku.php?id=faq:ibc_equipment_setup http://help.ibcworld.net/items/13| +
-|:::|POS-X|EVO-OMNI (2D)|http://wiki.wws5.com/doku.php?id=faq:ibc_equipment_setup| +
-|:::|POS-X|EVO-PS1-ADU (2D)|http://wiki.wws5.com/doku.php?id=faq:ibc_equipment_setup#pos-x_evo-ps1-edu| +
-|:::|POS-X|ION Wireless|http://wiki.wws5.com/doku.php?id=pos-x_ion_linear_wireless_configuration http://help.ibcworld.net/items/21| +
-|:::|POS-X|XI3000|http://www.pos-x.com/pos-system-hardware/barcode-scanners/xi3000/+
-|:::|POS-X|XI3200|http://www.pos-x.com/pos-system-hardware/barcode-scanners/xi3200/+
-|:::|Wasp|WASP WLR8950|http://wiki.wws5.com/doku.php?id=wasp_wlr8950| +
-|:::|Wasp|Wasp WWS100i Bluetooth Scanner|http://wiki.wws5.com/doku.php?id=wasp_wws100i_bluetooth_scanner| +
-|:::|Wasp|Wasp WWS-500 scanner|http://wiki.wws5.com/doku.php?id=faq:scanners:wasp_wws500| +
-|:::|Wasp|WWS-800|http://wiki.wws5.com/doku.php?id=faq:wasp800| +
-|:::|Wasp|WWS-850L|http://www.waspbarcode.com/barcode-scanners/wws850-freedom-barcode-scanner| +
-|:::|Zebex|Z-3010|http://wiki.wws5.com/doku.php?id=zebex_z-3010_barcode_scanner| +
-^ ^ ^ ^ ^ +
-^ ^ ^ ^ ^ +
-^PIN Pads{{:hardware:pinpads:pinpads.jpg?200|}}^ For information concerning PIN pads and Credit Card processing, please refer to the Subject Master Document, found here [[projects:implementation_areas:credit_cards_subject_master| --- MORE INFO --- ]] ^|| +
-|:::|Ingenico|ICT250|Canada – semi-integrated in progress. Alternative for Moneris Vx810| +
-|:::|Ingenico|iSC250|Supported for US EMV. [[http://wiki.wws5.com/doku.php?id=isc250_configuration|Ingenico ISC 250 Setup ]] | +
-|:::|Moneris|iiPP320|Supported for Beta Customers only at this time. http://wiki.wws5.com/doku.php?id=moneris_pinpads#moneris_pospad_emv_chip_pin_contactless| +
-|:::|VeriFone|Mx915|Not supported for EMV.| +
-|:::|VeriFone|SE1000|Not supported for EMV.| +
-|:::|VeriFone|Vx805|Supported in US EMV.| +
-|:::|VeriFone|Vx810|Canada - Being phased out but no replacement yet. US – no longer manufactured. Currently only refurbished ones are available for emergencies.| +
-|:::|VeriFone|Vx820|Now supported in Canada by Vantiv and Paymentech for EMV and Contactless.Requires Datacap Version 5.06.10, DSIEMVClientX version v1.27 and Verifone Vx820 PIN pad running XPI 12.08.16| +
-^ ^ ^ ^ ^ +
-^ ^ ^ ^ ^ +
-^Signature Captures{{ :signature_captures.jpg |}}|Topaz|SignatureGem LCD T-LBK462-HSB-R|http://ibcworld.net/products/product-types/topaz-signaturegem-lcd-1x5-electronic-signature-pad/+
-|:::|Topaz|SignatureGem Non-LCD|www.sigpluspro.com/sigplus| +
-|:::| |Signature Capture Setup |http://wiki.wws5.com/doku.php?id=faq:setup_signature_capture| +
-^ ^ ^ ^ ^ +
-^ ^ ^ ^ ^ +
-^MSR Card Swipe{{ :msr_card_swipe.jpg |}}|POS-X|XM95|http://ibcworld.net/products/product-types/xm95u/+
-^ ^ ^ ^ ^ +
-^ ^ ^ ^ ^ +
-^Data Collectors{{ :data_collectors:trohestar:img_0838.jpg?175 |}} | trohestar | NS-3309T | http://wiki.wws5.com/doku.php?id=trohestar_data_collector . An alternate solution for Physical inventory Counts would be to use existing barcode scanners to create scan batches. Information on how to do this can be found here: [[http://wiki.wws5.com/doku.php?id=physical_inventory_count_barcode_scanner]] **| +
-^ ^ ^ ^ ^ +
-^ ^ ^ ^ ^ +
-^Pole Displays{{ :pole_displays.jpg |}}|POS-X|Xp8200 (USB)|http://wiki.wws5.com/doku.php?id=faq:ibc_equipment_setup| +
-^ ^ ^ ^ ^ +
-^ ^ ^ ^ ^ +
-^Cash Drawers{{ :cash_drawer.jpg |}}|POS-X|ION-C16A-1B|http://wiki.wws5.com/doku.php?id=faq:ibc_equipment_setup| +
-|:::|Logic Controls|CR3000|  +
-^ ^ ^ ^ ^ +
-^ ^ ^ ^ ^ +
-^Weigh Scales{{ :weigh_scales.jpg |}}|Metrologic Honeywell Unitech|MS-2320|http://wiki.wws5.com/doku.php?id=pos_devices_-_opos_drivers| +
-^ ^ ^ ^ ^ +
-^ ^ ^ ^ ^ +
-^IBC Packages{{ :ibc_packages.jpg |}}| | |http://ibcworld.net/category/products/product-types/windward-pos/+
-^ ^ ^ ^ ^ +
-^ ^ ^ ^ ^+
  
-====== Additional Links ======+^  {{  :hardware:datacollector-zebratc26.png?100  }}**Data Collectors**  ^^^^^ 
 +^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^ 
 +
 +|Zebra|TC21|  [[https://shopposportals.com/collections/windward-software/products/zebra-evm-tc21-wlan-android-gms-2d-imager-se4710-nfc-3gb-32gb-13mp-rear-camera-5mp-front-camera-2-pin-connector-basic-3100-mah-battery-north-america|{{:windward_supported_hardware_list:onprem-buynow.png}}]]  |  [[https://shopposportals.com/collections/windward-system-five-on-cloud/products/zebra-evm-tc21-wlan-android-gms-2d-imager-se4710-nfc-3gb-32gb-13mp-rear-camera-5mp-front-camera-2-pin-connector-basic-3100-mah-battery-north-america|{{:windward_supported_hardware_list:oncloud-buynow.png}}]] 
 +|Zebra|TC26|  [[https://shopposportals.com/collections/windward-software/products/zebra-evm-tc26-wlan-and-wwan-android-gms-2d-imager-se4710-nfc-3gb-32gb-13-mp-rear-camera-5mp-front-camera-2-pin-connector-basic-3100-mah-battery|{{:windward_supported_hardware_list:onprem-buynow.png}}]]  |  [[https://shopposportals.com/collections/windward-system-five-on-cloud/products/zebra-evm-tc26-wlan-and-wwan-android-gms-2d-imager-se4710-nfc-3gb-32gb-13-mp-rear-camera-5mp-front-camera-2-pin-connector-basic-3100-mah-battery|{{:windward_supported_hardware_list:oncloud-buynow.png}}]]  |  This device has a Cellular option, but only the Wi-Fi function is supported in the SCAN App | 
 +You can request support for a new device:[[https://forms.office.com/Pages/ResponsePage.aspx?id=7JbGdftbkkiaDJGHqQYc1nHLbNQEMstChWN01YsFycZUNkRRTjNYVDhNOTdUV1FGQzlGNjFNMElQUS4u|Windward Software Hardware Request]] 
 +\\ 
 +*On-Prem is defined as System 5 installed on a Physical Server 
 +\\ *OnCloud is defined as System 5 hosted in our Cloud environment
  
-===== Networking Best Practices =====+^  {{  :hardware:pinpads:pinpads.jpg?200  }}**PIN Pads**  ^^^^^ 
 +^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^ 
 +^  For information concerning PIN pads and Credit Card processing, please refer to the Subject Master Document, found here [[projects:implementation_areas:credit_cards_subject_master| --- MORE INFO --- ]]  ^^^^^ 
 +|Ingenico|Lane 3000|  **Supported**  |  **Supported**  |  Supported for US EMV  | 
 +|Ingenico|Link 2500|  **Supported**  |  **Supported**  |  Supported for US EMV  | 
 +|VeriFone|P400|  **Supported**  |  **Supported**  |  Global Payments and Moneris Canada / WorldPayIP + Netepay Hosted US  | 
 +^  **Legacy Devices**  ^^^^^ 
 +^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^ 
 +|Ingenico|iPP320|  <color red>**LIMITED SUPPORT***</color>  |  <color red>**LIMITED SUPPORT***</color>  |  [[http://wiki.wws5.com/doku.php?id=moneris_pinpads#moneris_pospad_emv_chip_pin_contactless|Windward On-Prem Setup]]  Tokenization is not supported on this device|  
 +|Ingenico|iSC250|  <color red>**LIMITED SUPPORT***</color>  |  <color red>**LIMITED SUPPORT***</color>  |  [[http://wiki.wws5.com/doku.php?id=isc250_configuration|Windward On-Prem Setup]] Supported for US EMV.  | 
 +|Ingenico|Lane 7000|  <color red>**LIMITED SUPPORT***</color>  |  <color red>**LIMITED SUPPORT***</color>  |  Supported for US EMV  | 
 +|VeriFone|Vx805|  <color red>**LIMITED SUPPORT***</color>  |  <color red>**LIMITED SUPPORT***</color>  |  US EMV contactless not supported  |
  
-http://wiki.wws5.com/doku.php?id=faq:windows_networking_best_practices+You can request support for a new device:[[https://forms.office.com/Pages/ResponsePage.aspx?id=7JbGdftbkkiaDJGHqQYc1nHLbNQEMstChWN01YsFycZUNkRRTjNYVDhNOTdUV1FGQzlGNjFNMElQUS4u|Windward Software Hardware Request]] 
 +\\ 
 +*On-Prem is defined as System 5 installed on a Physical Server 
 +\\ *OnCloud is defined as System 5 hosted in our Cloud environment
  
 +^  {{ :signature_captures.jpg  }}**Signature Captures**  ^^^^^
 +^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^
 +^  [[http://wiki.wws5.com/doku.php?id=faq:setup_signature_capture|Signature Capture Setup]]  ^^^^^
 +|Topaz| LCD T-LBK460-BSB-R|  <color grey>**Not Supported**</color>  |  **Supported**  |  [[http://wiki.wws5.com/doku.php?id=employee:topaz_t-lbk460-bsb-r_signature_capture_cloud|Windward On-Cloud Setup]]  |
 +|Topaz|SignatureGem LCD T-LBK462-HSB-R|  [[https://shopposportals.com/collections/windward-software/products/topaz-idgem-lcd-1x5-signature-pad-and-fingerprint-scanner-combo-usb-backlit-with-software|{{:windward_supported_hardware_list:onprem-buynow.png}}]]  |  [[https://shopposportals.com/collections/windward-system-five-on-cloud/products/topaz-idgem-lcd-1x5-signature-pad-and-fingerprint-scanner-combo-usb-backlit-with-software|{{:windward_supported_hardware_list:oncloud-buynow.png}}]]  |  [[http://wiki.wws5.com/doku.php?id=topaz_t-lbk462-hsb-r_signature_capture_cloud|Windward On-Cloud Setup]]  |
 +|Topaz|SignatureGem Non-LCD|  **Supported**  |  <color grey>**Not Supported**</color>  |
 +You can request support for a new device:[[https://forms.office.com/Pages/ResponsePage.aspx?id=7JbGdftbkkiaDJGHqQYc1nHLbNQEMstChWN01YsFycZUNkRRTjNYVDhNOTdUV1FGQzlGNjFNMElQUS4u|Windward Software Hardware Request]]
 +\\
 +*On-Prem is defined as System 5 installed on a Physical Server
 +\\ *OnCloud is defined as System 5 hosted in our Cloud environment
  
 +^  {{ :pole_displays.jpg  }}**Pole Displays**  ^^^^^
 +^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^
 +|Logic Controls|PD3000|  **Supported**  |  [[https://shopposportals.com/collections/windward-system-five-on-cloud/products/logic-controls-pd3000|{{:windward_supported_hardware_list:oncloud-buynow.png}}]]  |
 +|POS-X|Xp8200 (USB)|  [[https://shopposportals.com/products/pos-x-customer-pole-display-usb-xp8200|{{:windward_supported_hardware_list:onprem-buynow.png}}]]  |  **Supported**  |
 +You can request support for a new device:[[https://forms.office.com/Pages/ResponsePage.aspx?id=7JbGdftbkkiaDJGHqQYc1nHLbNQEMstChWN01YsFycZUNkRRTjNYVDhNOTdUV1FGQzlGNjFNMElQUS4u|Windward Software Hardware Request]]
 +\\
 +*On-Prem is defined as System 5 installed on a Physical Server
 +\\ *OnCloud is defined as System 5 hosted in our Cloud environment
  
-===== Networking Multiple Locations Best Practices =====+^  {{ :cash_drawer.jpg  }}**Cash Drawers**  ^^^^^ 
 +^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^ 
 +|POS-X|ION-C16A-1B|  [[https://shopposportals.com/collections/windward-software/products/ion-slide-cash-drawer-16x16-stainless|{{:windward_supported_hardware_list:onprem-buynow.png}}]]  |  <color grey>**Testing Required**</color> 
 +|Logic Controls|CR3000|  **Supported**  |  <color grey>**Testing Required**</color>  |     
 +|Technical Tip||  **Supported**  |  <color grey>**Testing Required**</color>  | The cash drawer will need to be connected to the Slip Printer or to a special card in the workstation. Make sure you order compatible parts along with the cables.| 
 +You can request support for a new device:[[https://forms.office.com/Pages/ResponsePage.aspx?id=7JbGdftbkkiaDJGHqQYc1nHLbNQEMstChWN01YsFycZUNkRRTjNYVDhNOTdUV1FGQzlGNjFNMElQUS4u|Windward Software Hardware Request]] 
 +\\ 
 +*On-Prem is defined as System 5 installed on a Physical Server 
 +\\ *OnCloud is defined as System 5 hosted in our Cloud environment
  
-http://wiki.wws5.com/doku.php?id=faq:multilocation_networking_best_practices+^  {{ :weigh_scales.jpg  }}**Weigh Scales**  ^^^^^ 
 +^  MAKE  ^  MODEL  ^  SUPPORTED ON-PREM*  ^  SUPPORTED ON CLOUD*  ^  NOTES  ^ 
 +|Honeywell|MS-2320|  **Supported**  |  <color grey>**Testing Required**</color>  |  [[http://wiki.wws5.com/doku.php?id=pos_devices_-_opos_drivers|Windward On-Prem Setup]] | 
 +|Zebra|MP7011|**Supported V7**|**Supported**|[[Zebra Scale Scanner]]| 
 +\\ 
 +You can request support for a new device:[[https://forms.office.com/Pages/ResponsePage.aspx?id=7JbGdftbkkiaDJGHqQYc1nHLbNQEMstChWN01YsFycZUNkRRTjNYVDhNOTdUV1FGQzlGNjFNMElQUS4u|Windward Software Hardware Request]] 
 +  
 +\\ 
 +*On-Prem is defined as System 5 installed on a Physical Server 
 +\\ *OnCloud is defined as System 5 hosted in our Cloud environment
  
 +^  {{ :ibc_packages.jpg  }}**Packages**  ^^^^^
 +^  Windward Software can connect you with additional Supported hardware and hardware packages: [[https://shopposportals.com/collections/windward-software|{{:windward_supported_hardware_list:onprem-buynow.png}}]]  [[https://shopposportals.com/collections/windward-system-five-on-cloud|{{:windward_supported_hardware_list:oncloud-buynow.png}}]]  ^^^^^
  
 +<color red>*</color>Windward Software provides Best Effort Support for Legacy Devices. Non-Legacy Devices with Full Support are recommended.
  
 +<note tip>You can request support for a new device by filling out the form located at the following link[[https://forms.office.com/Pages/ResponsePage.aspx?id=7JbGdftbkkiaDJGHqQYc1nHLbNQEMstChWN01YsFycZUNkRRTjNYVDhNOTdUV1FGQzlGNjFNMElQUS4u|Windward Software Hardware Request]]</note>
 +====== Additional Links ======
 +[[http://wiki.wws5.com/doku.php?id=faq:windows_networking_best_practices|Networking Best Practices]]
  
-== Updated by Steve Wind Aug 20 2018 ==+[[http://wiki.wws5.com/doku.php?id=faq:multilocation_networking_best_practices|Networking Multiple Locations Best Practices]] 
 + 
 +\\ 
 +\\ 
 +== Updated March 3, 2023 ==
supported_peripheral_hardware_list.1574381111.txt.gz · Last modified: 2019/11/21 16:05 (4 years ago) by swind