Differences

This shows you the differences between two versions of the page.

--- faq:programming_a_symbol_ls_2208_barcode_scanner [2020/04/27 16:59 (4 years ago)] – kevin
+++ faq:programming_a_symbol_ls_2208_barcode_scanner [2023/04/27 15:52 (12 months ago)] (current) – swind
@@ Line 11: / Line 11: @@
 |  Zebra RS6000   |  Yes               |
 |  Zebra LS3578   |  Yes               |
+|  Zebra DS6707   |  Yes               |
+|  Zebra DS8108   |  Yes               |
 |  Zebra DS9208   |  Yes               |
@@ Line 17: / Line 19: @@
 Most modern scanners support **USB-Serial**, sometimes called USB CDC Host. This can be used with the POS device manager and will work reliably without losing scans.  It will work with all versions of Remote Desktop. It is also the easiest to configure as it requires no preamble characters. Just select the Virtual COM port in System Five and you are done.
-<note important>This configuration of USB-Serial will require the POS Device Manager</note>
+<note important>This configuration of USB-Serial will require the POS Device Manager\\
+Scanners manufactured prior to Dec 31, 2014 will not have this option</note>
 Both System Five on Cloud and On-Prem customers should use USB-Serial with the Remote POS Device Manager. You no longer need the STX preamble for USB-Serial configurations.  {{ :barcodescan:symbol_ls2208.pdf | LS 2208 Using USB-Serial port}}
@@ Line 28: / Line 31: @@
 You may need to [[https://www.zebra.com/us/en/support-downloads/software/drivers/usb-cdc-driver.html|install CDC drivers]].
-)  Complete configuration by selecting this serial port in the Windward Remote POS device manager.
+)  Complete configuration by selecting this serial port in the Windward Point of Sale Device manager.
+{{:faq:posdevice-com.jpg?400|}}
 ===== Legacy STX Prefix =====