Differences

This shows you the differences between two versions of the page.

--- pinpads [2014/06/23 15:55 (10 years ago)] – [Verifone vx810] cliff
+++ pinpads [2021/08/30 16:54 (3 years ago)] (current) – plagrada
@@ Line 1: / Line 1: @@
-====== Supported USA PINPads ======
+====== Certified USA EMV PINPads ======
-**There be dragoons here** - Please read carefully.\\
+https://newaccount1608055419986.freshdesk.com/a/solutions/articles/66000495033
-  * Ensure your PINPad is encrypted for your payment processor.
-  * Please read the fine print. Not all pinpads will work for all situations. Items to consider:Terminal Services;Serial, USB or TCP/IP;Signature Capture; Card on File.
-  * Some driver installs may be challenging. Please ensure you have at least 2 weeks lead time before going live.
-  * US EMV is not supported. Even though your pinpad may have a chip card reader, chances that it will support EMV when available are slim.
-  * Some PINpads require loading of datacap forms or OPOS drivers by the Supplier or other third party.
-  * If the PINpad you are considering is not on this list, it probably won't work.  Replacement models for obsolete PINpads probably won't work either.
-  * Beware of purchasing second hand equipment from non-POS vendors.
-===== Verifone vx810 =====
-{{faq:vx810.jpg|}}
-  * :-P **New to version 6.0.77**
-  * PCI out of scope, therefore does not support card on file.
-  * VX810 P/N: M281-503-02-R
-  * Firmware Required: XPI 4.24A or above
-  * RS232 Serial (Serial to USB converters will not work).
-    * **WARNING: USB version is untested so not listed as supported as of 2014-06-13(cm) as per discussion with our programming team.**
-  * PIN Entry - Device must have Debit Keys injected for your processor.
-  * Terminal Services supported using RS232 Port redirection.
-  * [[http://www.datacapepay.com/dsipdcx.htm|Datacap dsiPDCX install]]
-  * Ordering instructions from JR's POS Depot:
-<code>
-The Vx810 is supported in the US with the dsiPDCX integration. When ordered it needs to be specified that it is for the US with PDCX and needs the Global East (Mercury) Global Debit key as well.
-Keep in mind that the US Vx810 has completely different software on it
-than the Canadian ones and cannot be ordered through Mercury. They would
-need to be ordered through JRs POS Depot or POS Data.
-</code>
-===== Equinox 5300 =====
-{{hypercom_l5300.jpg|}}
-  * :-P **New to version 6.0.77**
-  * PCI out of scope, therefore does not support card on file.
-  * Signature Capture
-  * Magnetic Stripe Reader
-  * PIN Entry - Device must have Debit Keys injected for your processor
-  * Optional NFC (MasterCard Paypass, Visa payWave)
-  * Must be loaded with Datacap forms, Purchase from JR's POS Depot, or [[http://www.posdata.com|POSData]] (see below) with forms, or you will need to ship the device to [[http://www.datacapsystems.com/contact-info/|datacap systems]] for loading of the forms.
-  * Chip Reader - not currently capable of EMV transactions.
-  * USB or RS232 Serial
-  * [[http://www.datacapepay.com/dsipdcx.htm|Datacap dsiPDCX install]]
-  * Configuring [[datacap dsiPDCX Devices]]
-  * :-( Does not work with Terminal Services Serial Port redirection.
-===== VeriFone Mx915 =====
-** :!: BETA - Windward does not offer support on this device yet, please see your pinpad supplier for help
-**{{:pos_x:verifone-mx915.png?300|}}
-  *  :-P **New to version 6.0.82.116**
-  * PCI out of scope, therefore does not support card on file.
-  * Signature Capture
-  * Magnetic Stripe Reader
-  * PIN Entry - Device must have Debit Keys injected for your processor
-  * Chip Reader - not currently capable of EMV transactions.
-  * RS232 Serial ONLY **(USB HAS NOT BEEN TESTED)**
-  * Must be loaded with Datacap forms, Purchase from JR's POS Depot, or POSData (see below) with forms, or you will need to ship the device to datacap systems for loading of the forms.
-  * [[http://www.datacapepay.com/dsipdcx.htm|Datacap dsiPDCX install]]
-  * Configuring [[datacap dsiPDCX Devices]]
-  * :!: Support for Terminal Services serial port redirection has not been tested on Wide area networks.
-===== Ingenico i6580 (end of life / legacy) =====
-{{ingenico6580-small.jpg|}}
-  * :-P **New to version 6.0.77**
-  * PIN Entry - Device must have Debit Keys injected for your processor
-  * Integrated track 1 and 2 Magnetic Stripe Reader
-  * Signature Capture Pad
-  * Color Display
-  * USB-HID
-  * USB-COM
-  * [[http://www.poweredusb.org/ | Powered USB]] (Large double USB Port with separate power plug)
-  * Serial/RS-232 (COM Port) - Use with Local Terminal Services
-  * TCP/IP Use with Terminal Services
-  * :!: Driver installation can be challenging.
-  * This device is no longer being manufactured.
-===== Verifone SE1000  =====
-{{verifone1000se-new.jpg|}}
-  * PINPad Only
-  * **Requires separate MSR**
-  * Serial/RS-232 (COM Port) :-( (Does not work with Terminal Services)
-Do not use a USB-Serial connnector. You need a true serial port.
-===== Ingenico i6550 (LEGACY) =====
-{{ingenico6550.jpg|}}
-  * :-P **New to version 5.41**
-  * PINPad
-  * Integrated track 1 and 2 MSR
-  * Signature Capture Pad
-  * Monochrome Display
-  * USB-HID
-  * USB-COM
-  * [[http://www.poweredusb.org/ | Powered USB]] (Large double USB Port with separate power plug)
-  * Serial/RS-232 (COM Port) - Use with Local Terminal Services
-  * TCP/IP Use with Terminal Services
-  * Drivers ftp://ftp.windward-ca.com/pub/special/ingenico_s5.zip
-  * :!:Driver installation can be challenging.
-  * This device has been End of Life'd but may be still available refurbished.
-===== Ingenico i6780 (LEGACY) =====
-{{ingenico6780.jpg|}}
-  * :-P **New to version 5.41**
-  * PINPad
-  * Integrated track 1 and 2 MSR
-  * Signature Capture Pad
-  * Large Color Display
-  * USB-HID
-  * USB-COM
-  * [[http://www.poweredusb.org/ | Powered USB]] (Large double USB Port with separate power plug)
-  * Serial/RS-232 (COM Port) - Use with Terminal Services
-  * TCP/IP Use with Terminal Services
-  * Drivers ftp://ftp.windward-ca.com/pub/special/ingenico_s5.zip
-  * :!: Driver installation can be challenging.
-  * This device has been End of Life'd but may be still available refurbished.
-===== Important Information on Device Location =====
-The pinpad device may be mounted on a flat surface, wall, or customer stand (recommended). We recommend physically securing the device to avoid theft. Power may be provided from a host Point of Sale system or from an Ingenico power supply. The device must be placed close to an easily-accessible power outlet.
-Do not place the pinpad on a PC monitor, adjacent to an electronically active security tag deactivation system, or near other sources of magnetic fields.\\
-|**The Pinpad device must be at least 12 inches away from an electronically active type of security tag**|
-===== Purchase information  =====
-Products Mercury Payment Systems can provide in the USA:
-  * Stand Alone Credit Card Terminals.
-  * Dial Backup Bridge.
-You can purchase PINpads for the United States of America from the following sources.
-<code>
-JR's POS Depot
-Contact:  Luisa Rodas
-TEL (954) 741-3433, x130
-TOL (877) 999-7374
-FAX (253) 238-2414
-http://jrposdepot.com
-[email protected]
-</code>
-<code>
-POS DATA
-Contact:  Becky O'Brien, Regional Business Development Manager
-TEL   310-883-8340
-eMail [email protected]
-web   http://www.posdata.com
-</code>
-<code>
-If you are considering purchasing second hand equipment from other than a POS vendor, please be aware that:
-It may be compromised (hacked)
-The MSR and keys may be worn.
-You will have to send it somewhere to have the correct firmware, forms and encryption keys loaded.
-It may no longer be PCI compliant.
-</code>
 ===== Other information =====
   * [[pinpads|Supported USA PINPads]]
+  * [[faq:emv-us|EMV-US options]]
   * [[global_pinpads|Supported Canadian Global PINPads]]
   * [[moneris_pinpads|Supported Canadian Moneris PINPads]]
   * [[paymentech_pinpads|Supported Canadian Paymentech PINPads]]
   * [[desjardins_flex_i5300|Supported Canadian Desjardins PINPads]]
+  * [[Contactless Payments|Contactless Payments]]