Important - each pinpad must be EMV certified with each processor. Just because a pinpad has a chip reader, does not mean that it is EMV certified with any or your processor.
Most processors now support the Vx805 This is what you need to purchase.
There be dragoons here - Please read carefully.
The pinpad device may be mounted on a flat surface, wall, or customer stand (recommended). We recommend physically securing the device to avoid theft. Power may be provided from a host Point of Sale system or from an Ingenico power supply. The device must be placed close to an easily-accessible power outlet.
Do not place the pinpad on a PC monitor, adjacent to an electronically active security tag deactivation system, or near other sources of magnetic fields.
|The Pinpad device must be at least 12 inches away from an electronically active type of security tag|
Products Mercury Payment Systems can provide in the USA:
You can purchase PINpads for the United States of America from the following sources.
JR's POS Depot Contact: Luisa Rodas TEL (954) 741-3433, x130 TOL (877) 999-7374 FAX (253) 238-2414 http://jrposdepot.com [email protected]
POS DATA Contact: Becky O'Brien, Regional Business Development Manager TEL 310-883-8340 eMail [email protected] web http://www.posdata.com
If you are considering purchasing second hand equipment from other than a POS vendor, please be aware that: It may be compromised (hacked) The MSR and keys may be worn. You will have to send it somewhere to have the correct firmware, forms and encryption keys loaded. It may no longer be PCI compliant.