There be dragoons here - Please read carefully.

• Ensure your PINPad is encrypted for your payment processor.
• Please read the fine print. Not all pinpads will work for all situations. Items to consider:Terminal Services;Serial, USB or TCP/IP;Signature Capture; Card on File.
• Some driver installs may be challenging. Please ensure you have at least 2 weeks lead time before going live.
• US EMV is not supported. Even though your pinpad may have a chip card reader, chances that it will support EMV when available are slim.
• Some PINpads require loading of datacap forms or OPOS drivers by the Supplier or other third party.
• If the PINpad you are considering is not on this list, it probably won't work. Replacement models for obsolete PINpads probably won't work either.
• Beware of purchasing second hand equipment from non-POS vendors.

• New to version 6.0.77
• PCI out of scope, therefore does not support card on file.
• VX810 P/N: M281-503-02-R
• Firmware Required: XPI 4.24A or above
• RS232 Serial (Serial to USB converters will not work)
• PIN Entry - Device must have Debit Keys injected for your processor.
• Terminal Services supported using RS232 Port redirection.
• Datacap dsiPDCX install

• New to version 6.0.77
• PCI out of scope, therefore does not support card on file.
• Signature Capture
• Magnetic Stripe Reader
• PIN Entry - Device must have Debit Keys injected for your processor
• Optional NFC (MasterCard Paypass, Visa payWave)
• Must be loaded with Datacap forms, Purchase from JR's POS Depot, or POSData (see below) with forms, or you will need to ship the device to datacap systems for loading of the forms.
• Chip Reader - not currently capable of EMV transactions.
• USB or RS232 Serial
• Datacap dsiPDCX install
• Configuring datacap dsiPDCX Devices
• Does not work with Terminal Services Serial Port redirection.

BETA - Windward does not offer support on this device yet, please see your pinpad supplier for help

• New to version 6.0.82.116
• PCI out of scope, therefore does not support card on file.
• Signature Capture
• Magnetic Stripe Reader
• PIN Entry - Device must have Debit Keys injected for your processor
• Chip Reader - not currently capable of EMV transactions.
• RS232 Serial ONLY (USB DOES NOT WORK)
• Must be loaded with Datacap forms, Purchase from JR's POS Depot, or POSData (see below) with forms, or you will need to ship the device to datacap systems for loading of the forms.
• Datacap dsiPDCX install
• Configuring datacap dsiPDCX Devices
• Support for Terminal Services serial port redirection has not been tested on Wide area networks.

• New to version 6.0.77
• PIN Entry - Device must have Debit Keys injected for your processor
• Integrated track 1 and 2 Magnetic Stripe Reader
• Signature Capture Pad
• Color Display
• USB-HID
• USB-COM
• Powered USB (Large double USB Port with separate power plug)
• Serial/RS-232 (COM Port) - Use with Local Terminal Services
• TCP/IP Use with Terminal Services
• Driver installation can be challenging.
• This device is no longer being manufactured.

• PINPad Only
• Requires separate MSR
• Serial/RS-232 (COM Port) (Does not work with Terminal Services)

Do not use a USB-Serial connnector. You need a true serial port.

• New to version 5.41
• PINPad
• Integrated track 1 and 2 MSR
• Signature Capture Pad
• Monochrome Display
• USB-HID
• USB-COM
• Powered USB (Large double USB Port with separate power plug)
• Serial/RS-232 (COM Port) - Use with Local Terminal Services
• TCP/IP Use with Terminal Services
• Drivers ftp://ftp.windward-ca.com/pub/special/ingenico_s5.zip
• :!:Driver installation can be challenging.
• This device has been End of Life'd but may be still available refurbished.

• New to version 5.41
• PINPad
• Integrated track 1 and 2 MSR
• Signature Capture Pad
• Large Color Display
• USB-HID
• USB-COM
• Powered USB (Large double USB Port with separate power plug)
• Serial/RS-232 (COM Port) - Use with Terminal Services
• TCP/IP Use with Terminal Services
• Drivers ftp://ftp.windward-ca.com/pub/special/ingenico_s5.zip
• Driver installation can be challenging.
• This device has been End of Life'd but may be still available refurbished.

The pinpad device may be mounted on a flat surface, wall, or customer stand (recommended). We recommend physically securing the device to avoid theft. Power may be provided from a host Point of Sale system or from an Ingenico power supply. The device must be placed close to an easily-accessible power outlet. Do not place the pinpad on a PC monitor, adjacent to an electronically active security tag deactivation system, or near other sources of magnetic fields.

Products Mercury Payment Systems can provide in the USA:

• Stand Alone Credit Card Terminals.
• Dial Backup Bridge.

You can purchase PINpads for the United States of America from the following sources.

JR's POS Depot
Contact:  Luisa Rodas
TEL (954) 741-3433, x130
TOL (877) 999-7374
FAX (253) 238-2414
http://jrposdepot.com
[email protected]

POS DATA
Contact:  Becky O'Brien, Regional Business Development Manager
TEL   310-883-8340
eMail [email protected]
web   http://www.posdata.com

If you are considering purchasing second hand equipment from other than a POS vendor, please be aware that:
It may be compromised (hacked)
The MSR and keys may be worn.
You will have to send it somewhere to have the correct firmware, forms and encryption keys loaded.
It may no longer be PCI compliant.

• Supported USA PINPads
• Supported Canadian Global PINPads
• Supported Canadian Moneris PINPads
• Supported Canadian Paymentech PINPads
• Supported Canadian Desjardins PINPads